User manual SONY SRW-5500

[. . . ] HD DIGITAL VIDEOCASSETTE RECORDER SRW-5000 SRW-5500 FORMAT CONVERTER BOARD HKSR-5001 DIGITAL BETACAM PROCESSOR BOARD HKSR-5002 RGB PROCESSOR BOARD HKSR-5003 OPERATION MANUAL 1st Edition (Revised 4) [English] Important Safety Instructions · · · · · · · Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] appears between the Time and Mrk columns to indicate that the line (clip) is write-protected. CUE SCAN ENTRY POINT COMMNT EDIT CHANGE DATA DEL POINT REC DATE[2003/02/25] TITLE[ No. Time Mrk 0 1 2 3 4 5 6 00:01:02:03 --:--:--:-00:03:04:03 00:04:04:03 00:05:05:03 00:06:06:03 --:--:--:-- Tk EOS[01:01:24:15] ] Rast100% Cut Scn NG 00:01:01:03 KP --:--:--:-OK @ 00:03:03:03 OK 00:04:03:03 NG 00:05:04:03 OK 00:06:05:03 MARK PROTECT TAPE INFO CUENUM WRITE/ POINT EXIT To cancel a write-protection Press the [F7] (PROTECT) button. A message appears (in the control panel display) requesting confirmation of cancellation operation. 4-4 CUE Menu 85 CUE SCAN ENTRY POINT COMMNT EDIT CHANGE DATA DEL POINT REC DATE[2003/02/25] EOS[01:01:24:15] TITLE[ T A P E I N F O R M A T I O N ] Rest100% No. Time Mrk Tk Cut Scn 0 1 2 3 4 5 6 ID: 001234567 TITLE ADMIN: Ka sh 0 0 : 0 1 : 0 2 : 0 3 n r iN G a 00:01:01:03 MODEL: HD 00 - - : - - : - - : - - W - 7K P --:--:--:-SERIAL NU R: 0 123 0 0 : 0 3 : 0 4 : 0 3 M B EO K 0@ 00 0 : 0 3 : 0 3 : 0 3 WRIT RO T: ON 0 0 : 0 4 : 0 4 : 0 3 E PO K T E C0 0 : 0 4 : 0 3 : 0 3 TAPE THR C T: 123 0 0 : 0 5 : 0 5 : 0 3 E A DN G O U N0 0 : 0 5 : 0 4 : 0 3 CUE POI NU R: 5 0 0 : 0 6 : 0 6 : 0 3 N T O K M B E0 0 : 0 6 : 0 5 : 0 3 CON --:--:--:--TROL MODE: panel SIZE: 1024 USED: 234 Id Edit ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghjiklmnopqrstuvwxyz 0123456789[]()<>@+-*=!?:; $ # % & , . " \ ^ _ ' / ~ '{ } H D 1 D 2 C A M MARK PROTECT TAPE INFO CUENUM WRITE/ POINT EXIT SPACE BACK SPACE SET LETTER SAVE/ EXIT To close the window Press the [F8] (TAPE INFO) button again. To change ID or ADMIN data 4 Press the[F7] (SET LETTER) button or the cursor center button. The selected character is entered. 2 Id Edit Chapter 4 Menu Settings B ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghjiklmnopqrstuvwxyz 0123456789[]()<>@+-*=!?:; $ # % & , . " \ ^ _ ' / ~ '{ } H D 1 D 2 C A M SPACE 1 1 2 46 2, 3, 4 5 BACK SPACE SET LETTER CANCEL SAVE/ EXIT Press the ALT/[F3] (ATTRIB EDIT) buttons. Press the R or r button to select "ID" (tape ID) or "ADMIN" (administrator), then press the ENTRY button. Repeat steps 3 and 4 to enter more characters. To enter a space Press the [F5] (SPACE) button. If you enter a wrong character Press the [F6] (BACK SPACE) button to go back. Then re-enter the character. FORMAT REC DATE[2003/02/25] EOS[01:01:--:--] T - F i l T I T L E [ N A p l a y TS a m p l e D I T S E L E C T ] R e s t 5 0 % A TRIB E No. Time Mrk Tk Cut Scn UNDO TITLE ALL ID 0 00:01:02:03 NG 01 0015 A01 ADM 1 0 0 : 0 2 : 0 3 : 0 3 I NK P 02 0015 A01 ATTAI 2 00:03:04:03 OK @ 03 0015 A01 EDIT Press [ TR to dit 3 0 0 : 0 4 : 0 5 : 0 3 E NO K Y ] 0 1 e0 1 7 ~ A 0 1 Press [ R] C 4 0 0 : 0 5 : 0 6 : 0 3 C LN G t o0 1 A N C E L B20 COPY 5 00:06:07:03 OK 02 B20 toCUE 6 --:--:--:-T-Fil MODE WRITE PRTEC To start the procedure over again Press the [F9] (CANCEL) button to start again. To change a character Press the cursor R button to move the cursor to the ID or ADMIN box. Then press the cursor T or t button to move the insertion position. If entered text is longer than the ID or ADMIN box t or T appears to the left or right of the box. 3 Press the T or t button to select a character. 6 Press the [F10] (SAVE/EXIT) button. The screen that was on before the ID or ADMIN data was changed is displayed again. 86 4-4 CUE Menu 4-5 VIDEO Menu In the VIDEO menu, adjust the video signal. The VIDEO menu screen shows the VTR operation mode, current position time code, time code type, and so on. About HD image quality adjustments When playing back tapes recorded in Y/PB/PR (4:2:2) format, HD image quality adjustments are enabled for the HD SDI OUTPUT 1, 2, and MONITOR connectors. Note HD image quality adjustments are not possible when playing back tapes recorded in GBR (4:4:4) format. Also, HD image quality adjustments are not possible when the optional HKSR-5001 Format Converter Board is installed and Y/PB/PR (4:2:2) format signals are output from the FORMAT CONV. To access the VIDEO menu screen Press the VIDEO button. TAPE LOCK LTC INTRP DF F2 TCR SERVO REF 00H 00M 00S00F AOUT --:--:--:-OUT --:--:--:-- AIN --:--:--:-IN --:--:--:-- Chapter 4 Menu Settings MASTER (HD) Y (HD) PB (HD) PR (HD) SETUP (HD) SYNC (HD) FINE (HD) Button [F2] [F4] [F5] [F6] [F7] [F8] [F9] [F10] ALT/[F1] ALT/[F2] ALT/[F3] ALT/[F4] ALT/[F5] ALT/[F6] ALT/[F7] ALT/[F8] ALT/[F9] Indication SERVO REF MASTER (HD) Y (HD) PB (HD) PR (HD) SETUP (HD) SYNC (HD) FINE (HD) MASTER LEVEL (D1) Y LEVEL (D1) B-Y LEVEL (D1) R-Y LEVEL (D1) VIDEO GAIN (ALL) CHROMA GAIN (ALL) CHROMA PHASE (ALL) BLACK LEVEL (ALL) SETUP LEVEL (CST) Function Settings Selects the reference signal for output. ext, input, auto Adjusts the Y, PB, and PR output levels prst, 0. 0 to 141. 3% simultaneously. [. . . ] f: Off-speed playback of video and audio possible. Time code playback and time code conversion possible (differs depending on menu settings). v: HDCAM-SR: Off-speed playback of video and audio possible. Time code conversion possible (differs depending on menu settings. [. . . ]