User manual SONY SS-S3

[. . . ] Where it is exposed to rain · Locations subject to strong vibration Clean the cabinet with a soft, dry cloth. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent, then wipe dry. [. . . ] They may damage the surface finish, or impair the operation of the shutter adaptor. This may cause the internal temperature to rise excessively and the unit to malfunction. Be careful not to spill water or other liquids on the unit or allow combustible or metallic objects inside the body. If used with foreign objects inside, the unit is liable to fail or cause a fire or an electric shock. Avoid driving the speaker system continuously with an input exceeding the maximum input power of this speaker system. ⷠBefore connecting, turn off the display to avoid damaging the speaker system. If the +/­ connection is incorrect, the bass tones seem to be missing and the position of the instruments becomes obscure. At this time, insert the red cord 2 into the + terminal and the black cord 3 into the ­ terminal. In addition, connect the cord inserted into the R terminal of the display to the right speaker, and the cord inserted into the L terminal of the display to the left speaker. First check the correct orientation of the terminal covers (d). Attach one of them to the speaker until it clicks, and push the cable cover to close. To remove the terminal covers from the speakers, open the cable covers first and then pull the terminal covers towards you. Make sure all speaker cords are connected to the corresponding terminals before attaching the terminal covers to the speakers. If you attach the covers the wrong way, the speakers or the terminal covers themselves may be damaged. [. . . ] Make sure all speaker cords are connected to the corresponding terminals before attaching the terminal covers to the speakers. If you attach the covers the wrong way, the speakers or the terminal covers themselves may be damaged. [. . . ]