User manual SONY SS-WL10 DIMENSIONS DIAGRAM

[. . . ] Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As an ENERGY STAR® partner, Sony Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 43 Adjustable parameters for each sound field . [. . . ] Cinema Studio EX is the integrated mode which operates these elements simultaneously. To turn the surround effect off The effects provided by the virtual speakers may cause increased noise in the playback signal. ⷠWhen listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. The receiver memorizes the last sound field selected for each program source (Sound Field Link). Whenever you select a program source, the sound field that was last applied is automatically applied again. For example, if you listen to DVD with "HALL" as the sound field, change to a different program source, then return to DVD, "HALL" will be applied again. 2 DTS: Lights up when DTS signals are input. 3 SW: Lights up when sub woofer selection is set to "YES" (page 16) and the audio signal is output from the SUB WOOFER jacks. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings). 7 COAX: Lights up when the source signal is a digital signal being input through the COAX terminal. 8 OPT: Lights up when the source signal is a digital signal being input through the OPT terminal. ⷠTo reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". When you use the Micro Satellite Speakers or other small speakers, adjust LEVEL on the sub woofer (page 18) to reinforce the bass. Resetting customized sound fields to the factory settings The TONE menu contains parameters that let you adjust the tone of the front speakers for optimum sound. The settings are applied to all sound fields. " appears in the display and all sound fields are reset at once. Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (see page 7). Do not press any button on the receiver or supplied remote during autobetical operation. ⷠIf you move to another area, repeat this procedure to store stations in your new area. If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. [. . . ] Make sure that you're tuned to an FM RDS station. The RDS information that you want does not appear. Remove any obstacles in the path between the remote and the receiver. ⷠReplace both batteries in the remote with new ones, if they are weak. [. . . ]