User manual SONY SS-WL30 DIMENSIONS DIAGRAM

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away batteries with general house waste; dispose of them correctly as chemical waste. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] When you tune in a station that provides RDS services, the RDS indicator lights up and the program service name appears in the display. RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak. Each time you press the button, RDS information on the display changes cyclically as follows: Program Service name t Frequency t Program Type indicationa) t Radio Text indicationb) t Current Time indication (in 24hour system) t Sound field currently applied t Volume level Programs where members of the public express their views by phone or in a public forum Programs about travel. Not for announcements that are located by TP/TA Programs on recreational activities such as gardening, fishing, cooking, etc. Jazz programs Country music programs Programs featuring the popular music of the country or region Programs featuring oldies music Folk music programs Investigative features Any programs not defined above A LFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. The boxes around the letters vary to show how the receiver downmixes the source sound. H COAX: Lights up when the source signal is a digital signal being input through the COAX terminal. I OPT: Lights up when the source signal is a digital signal being input through the OPT terminal. J DTS: Lights up when DTS signals are input. When played at home, DCS will create a powerful theater effect that mimics the artistic combination of sound and action as envisioned by the movie director. This is a standard mode, great for watching most any type of movies. These settings are applied to all sound fields except for the effect level parameter. The effect level parameter settings are stored individually for each sound field. Start playing a source encoded with multi channel surround effects (DVD, etc. Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. While monitoring the sound, press or repeatedly to select the setting you want. Repeat steps 3 and 4 to adjust the other parameters. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. You can adjust the tonal quality (bass, treble level) of the front speakers using the TONE menu. This parameter is valid only when you use a sound field selected with the MOVIE or MUSIC buttons. [. . . ] â· Sound fields do not function for the signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe. [. . . ]