User manual SONY ST-S3000ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Should any liquid or solid object fall into the unit, unplug the unit and have the unit checked by qualified personnel before operating it any further. Before operating the unit, be sure that the operating voltage of your unit is identical with that of your local power supply. Unplug the unit from the wall outlet if it is not to be used for an extended period of time. [. . . ] Press MENU, then press TUNING/SELECT + or ­ until "Disp-Mode" appears in the display. Return to a previous stage in the menu mode. If you press one of the buttons on the main unit, the minimal display changes to the full display with the selected brightness. After about 4 seconds, the display returns to the display mode you selected. With automatic tuning you can quickly tune in a station without having to know its frequency. Before you begin, make sure you have: · If you cannot tune in the station you want (Manual Tuning) With manual tuning you can search through all stations broadcasting on each band, and tune in stations with extremely weak signals that you might not be able to receive with automatic tuning. When you reach the highest or lowest frequency of any band, tuning stops. When the tuner locates a station, it stops automatically, "TUNED" appears in the display. the signal meter indicates the strength of the broadcast signal. Repeat step 3 until you tune in the appropriate station. You will not have the stereo effect but the distortion will be reduced. This tuner has various functions designed for better reception. First, try to receive stations with the standard settings. If the reception is not good, try altering the reception quality to obtain a clear signal. The tuner stores the following adjustments, together with the frequency when you make a station preset. 2 Press TUNING/SELECT + or ­ repeatedly until "Reception" appears in the display, then press ENTER. "FM Only" appears in the display if you choose "Reception" while tuned to an MW or LW station. 3 Press TUNING/SELECT + or ­ to choose "ATT/IF Band", then press ENTER. 4 Press TUNING/SELECT + or ­ to choose the ANT ATT setting you prefer, then press ENTER. "ANT ATT : ON" lowers the level of the input signal to receive broadcasts with extremely high signal levels. 5 Press TUNING/SELECT + or ­ to choose the IF setting you prefer, then press ENTER. "IF : Wide" tunes only the stations with high sound quality and low distortion. [. . . ] Stations without preset names are arranged by frequency, from low to high. Sort preset stations in order of their signal strength (FM stations only). Other stations are arranged by frequency. Sort preset stations in order of their frequency band (FM - MW - LW). [. . . ]