User manual SONY ST-SA3ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Should any liquid or solid object fall into the unit, unplug the unit and have the unit checked by qualified personnel before operating it any further. Before operating the unit, please read this manual thoroughly and retain it for future reference. Before operating the unit, be sure that the operating voltage of your unit is identical with that of your local power supply. [. . . ] When you reach the highest or lowest frequency of any band, tuning stops. This section shows you how to store up to 30 of your favorite FM or AM (MW and LW) stations manually onto preset codes made up of characters (A, B, or C) and numbers (1-0), such as A7. You can store up to 10 stations on each of the 3 different letters. You can use these letters to classify stations according to music category or station band. Turn TUNING/SELECT so that the preset you want to erase appears in the display. "MEMORY" appears along with the lowest vacant code to indicate that the tuner is ready to store the station. The tuner stores the station at the preset code you specified and the corresponding indicator lights on the preset calendar. Repeat steps 1 through 4 to store other stations. 1 Turn off the power 2 While holding down the number 5 button and MENU, press POWER to turn on the power. This tuner has various functions designed for better reception. First, try to receive stations with the standard settings. If the reception is not good, try altering the reception quality to obtain a clear signal. The tuner stores the following adjustments, together with the frequency when you make a station preset. "FM Only" appears in the display if you choose "Reception" while tuned to an MW or LW station. 3 Turn TUNING/SELECT to choose ATT/IF BAND and press ENTER. 4 Turn TUNING/SELECT to choose the ANT ATT setting you prefer and press ENTER. â· "ANT ATT : ON" lowers the level of the input signal to receive broadcasts with extremely high signal levels. 5 Turn TUNING/SELECT to choose the IF setting you prefer and press ENTER. â· "IF : Wide" tunes only the stations with high sound quality and low distortion. â· "IF : Narrow" improves selectivity and reduces interference to make broadcasts with weak signals easier to listen to. When you use two FM aerials, press ANTENNA to select FM ANTENNA terminal A or B. By selecting the aerial, you may be able to receive a station that cannot be received otherwise. [. . . ] If the setting of a programme is changed, the settings of the other programmes are all cleared. When PROGRAM is set to SET, the display window changes to full display/full brightness automatically. Use SHIFT and number buttons to select a preset station. If you plan on making more than one programme, be sure to programme the station with the earliest start time first. [. . . ]