User manual SONY STP-SS1AM NOTES ON USE

[. . . ] Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior. CAUTION NOTICE FOR THE CUSTOMERS IN THE U. S. A. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The display for entering the password appears. 2 Follow step 6 to enter a new password. Playing the disc for which Parental Control is set 1 Insert the disc and press DVD N. The "PARENTAL CONTROL" display appears. 2 Enter your 4-digit password using the numeric buttons, then press ENTER. United Kingdom 2184 The playback starts. Tip If you forgot your password, remove the disc, press DVD SETUP, then repeat steps 4 and 5 of "Limiting playback by children". When you are asked to enter your password, enter "199703" using the numeric buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the system and press DVD N. When the "PARENTAL CONTROL" display appears, enter your new password. Notes · When you play DVDs which do not have the Parental Control function, playback cannot be limited on this system. · Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. 32GB Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. There are two ways to store the station presets. To Method 4 Press TUNING MEMORY on the remote. 5 Press TUNING +/­ (or TUNER +/­ on the remote) repeatedly to select the desired preset station. Preset number REC DVD CD VCD TUNED STEREO AUTO Automatically tune in all of the stations that can be received in your area and then store them manually Automatic Tuning Preset Tuner 6 Press ENTER/YES on the remote. The station is stored to the selected preset number. Manually tune in and Manual Tuning Preset store the radio frequency of your favorite stations 7 Repeat steps 1 through 6 to preset other stations. Setting presets through automatic tuning Setting presets through manual tuning 1 Press TUNER FM or TUNER AM (or TUNER BAND on the remote) to select FM or AM. 1 Press TUNER FM or TUNER AM (or TUNER BAND on the remote) to select FM or AM. 2 Press PLAY MODE/TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 2 Press PLAY MODE/TUNING MODE repeatedly until "AUTO" appears in the display. 3 Press TUNING +/­ (or TUNER +/­ on the remote) repeatedly to tune in the desired station. 3 Press TUNING +/­ (or TUNER +/­ on the remote). The frequency changes as the system scans for a station. Press again to resume play. Fast-forward or Press m or M (or TAPE m or rewind M on the remote). Remove the tape Press Z PUSH. With the side you want to play/ record facing up Playing a tape You can use TYPE I (normal) tape. 1 Press FUNCTION repeatedly to switch the function to TAPE. 2 Press DIRECTION repeatedly to select "g" to play one side of a tape, "h" to play both sides, or "j"* to play both sides repeatedly. * The tape deck stops automatically after repeating the sequence five times. 3 Press TAPE nN. Press TAPE nN again to play the bottom side. 36GB Recording to a tape ­­ CD Synchro Recording/Recording Manually/Program Edit You can record from a DVD, VIDEO CD, CD (or connected components) or radio. You can use Type I (normal) tape. Steps Recording from a VIDEO CD/CD (CD Synchro Recording) Load a recordable tape into the cassette holder. Press FUNCTION repeatedly until "DVD" appears in the display. Press FUNCTION repeatedly to select the source you want to record from. Load a disc (or other audio source), or tune in the desired station. Recording manually 1 2 3 4 Tape The tape stands by for recording. " " and "B" (or "b") appear. To start recording on the side facing away from you, press TAPE nN until " " changes to " ". 5 6 Press DIRECTION repeatedly to select "g" to record on one side of the tape, or "h" or "j" to record on both sides. Press TAPE X, and then start playing the desired source. To stop recording Press x (or TAPE x on the remote). Note Depending on the VIDEO CD, you cannot use the CD Synchro Recording. In this case, record from the VIDEO CD manually. Tip For recording manually: To pause recording, press TAPE X. continued 37GB Recording to a tape (continued) 7 Press CD SYNCHRO. The tape stands by for recording and the CD stands by for playback. " " and "B" (or "b") appear, and the CD SYNCHRO indicator lights up. [. . . ] Even when the region code is not shown on the DVD, the region limit may still be activated. ALL Technology from Sony developed to produce surround sound for home use using only the supplied front speakers. You can enjoy the surround effect using the sound imaging to create virtual rear speakers from the sound of the front speakers without using actual rear speakers. VIDEO CD Scene On a VIDEO CD with PBC functions (page 18), the menu screens, moving pictures, and still pictures are divided into sections called "scenes". Each scene is assigned a scene number enabling you to locate the scene you want. A compact disc that contains moving pictures. The picture data uses the MPEG 1 format, one of the worldwide standards of digital compression technology. [. . . ]