User manual SONY STP-XH1 DATASHEET

[. . . ] Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior. [. . . ] · If CD-TEXT information is not recorded, the track numbers on the CD ("Tr**:") are automatically recorded instead. After recording Use Name function. Name can consist of uppercase and lowercase letters, numbers and symbols. Up to 127 characters can be entered for each name. 30GB 6 Press CAPS or SML on the remote to select the desired type of character. Type of character Press 4 Press MENU + or ­ on the remote to select the item, then press ENTER/YES on the remote. To Select Uppercase letters/blank space/symbols/numbers Lowercase letters/blank space/symbols/numbers CAPS. SML. Copy an album name Copy a track name Nm Cpy Album. (desired track number) 7 Press the corresponding text input button on the remote to enter a character. 5 Press MENU + or ­ on the remote repeatedly to select the item, then press ENTER/YES on the remote. To Select 8 Repeat steps 6 and 7 to enter the rest of the name. Copy a name to a track Copy a name to an album and all tracks in the album Copy a name to an album 9 Press ENTER/YES on the remote. To erase and change a character ttt ***. (desired track number) tttAll. HD - Editing In step 6 or 7, press TCURSOR or CURSORt on the remote repeatedly until the character you want to change flashes, press CLEAR on the remote to erase the character, and then repeat steps 6 and 7. To cancel labelling tttAlbum. If you select "tttAll", press ENTER/ YES on the remote again after "Nm Copy All??" starts flashing. When "Overwrite??" appears Press MENU/NO on the remote. To add a character After step 5, press TCURSOR or CURSORt on the remote repeatedly to move the cursor to the place where you want to add a character. And then proceed to step 6. The copy destination already has a title or artist name. To continue and copy it, press ENTER/ YES on the remote. Note Copying a title or artist name Once a title or artist name is copied to an album or track by the Name Copy function, it cannot be restored even if you use the Undo function. 1 Press MENU/NO on the remote after selecting the album you want to edit. Erasing a title or artist name You can use this function to erase a title or artist name. "Edit Menu" appears in the display. 2 Press MENU + or ­ on the remote repeatedly until "Nm Copy?" flashes in the display, then press ENTER/YES on the remote. 1 Press MENU/NO on the remote after selecting the album you want to edit. "Edit Menu" appears in the display. 3 Press MENU + or ­ on the remote to select the item, then press ENTER/YES on the remote. To Select 2 Press MENU + or ­ on the remote repeatedly until "Nm Erase?" flashes in the display, then press ENTER/YES on the remote. continued Copy a title Copy an artist name Nm Cpy Title?. Nm Cpy Artist?. 31GB Labelling a track, album or playlist (continued) 1 Press FUNCTION repeatedly until "HD" appears in the display. 3 Press MENU + or ­ on the remote to select the item, then press ENTER/YES on the remote. To Select 2 Press MENU/NO on the remote after selecting the album you want to edit. "Edit Menu" appears in the display. 3 Press MENU + or ­ on the remote repeatedly until "Tr Erase?" flashes in the display, then press ENTER/YES on the remote. Erase a title Erase an artist name Nm Ers Title?. · You cannot divide a track if the total number of tracks in the album will exceed 400 after the division. · You cannot divide a track if the total number of tracks on the HD will exceed 20, 000 after the division. · You cannot divide tracks in the Library area or in the Playlist. "Edit Menu" appears in the display. 3 Press MENU + or ­ on the remote repeatedly until "Combine?" flashes in the display, then press ENTER/YES on the remote. 4 Press MENU + or ­ on the remote repeatedly until the track number of the first track you want to combine flashes, then press ENTER/YES on the remote. Combining recorded tracks -- Combine Function You can use this function to combine two tracks into a single track in the Flexible area. The total number of tracks in the album decreases by one and all the tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers. The display for selecting a second track appears and the system plays the portion where joining will occur (the end of the first track and the beginning of the second track following it) repeatedly. 5 Press MENU + or ­ on the remote repeatedly until the track number of the second track you want to combine flashes, then press ENTER/YES on the remote. The combined track starts playing. continued 35GB Combining recorded tracks (continued) Notes · You cannot combine two albums into a single album. · If both of the combined tracks have track names, the name of the second track is erased. · If "Impossible" appears in the display, the tracks cannot be combined because repeated editing has been done to the track(s). This is a technical limitation of the HD system and is not a mechanical error. · You cannot combine tracks if the total playing time of the tracks will exceed 120 minutes after the combination. · You cannot combine tracks in the Library area or in the Playlist. Undoing the last edit -- Undo Function You can undo the last edit operation and restore the contents of the HD to the condition that existed before the operation. Note, however, that you cannot undo an edit operation if you perform any of the following operation after the edit: · Do another edit. [. . . ] · Unplug the system from the wall outlet (mains) if it will not be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. · Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further. · AC power cord must be changed only at the qualified service shop. Although this speaker system is magnetically shielded, there may be cases where the picture on some TV sets becomes magnetically distorted. [. . . ]