User manual SONY STR-DA2000ES

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] This function is convenient in the following cases. (Example) When you have two DVD players and no digital audio input jack is available for the second DVD player. Connect the first DVD player to the DVD COAXIAL IN jack and connect the second DVD player to the DVD OPTICAL IN jack. Also, connect the analog audio/video output jacks on the second DVD player to the VIDEO 2 INPUT jacks on the receiver. You cannot assign several audio inputs to the same input. ⷠYou cannot use the audio input for the original input when it is assigned to another input. ⷠWhen you assign the audio input, the INPUT MODE setting may change automatically (page 38). Rotate ­/+ to select the input you want to assign the digital audio input jack selected in step 4. The input you can assign varies for each audio input. You can switch the audio input mode for components for which this receiver has digital audio input jacks. By adjusting the LEVEL menu, you can customize the sound fields to suit your particular listening situation. The setup items you can adjust in each menu vary depending on the sound field. certain setup parameters may be dimmed in the display. This means that the selected parameter is either unavailable or fixed and unchangeable. You can adjust the balance and level of each speaker. These settings are applied to all sound fields. Start playing a source encoded with multi channel surround effects (DVD, etc. While monitoring the sound, rotate ­/+ to adjust the selected parameter. Repeat steps 3 and 4 to adjust the other parameters. Initial setting: OFF Lets you output the test tone sequentially from each speaker. When set to "AUTO", the test tone is output from each speaker automatically. When set to "FIX", you can select which speaker will output the test tone. [. . . ] Make sure you select the correct input on the remote. If there is a malfunction, the display shows a code of two numbers and a message. You can check the condition of the system by the message. refer to the following table to solve the problem. [. . . ]