User manual SONY STR-DA7100ES

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] Additionally, it only stores the stations with the clearest signals. Move the easy scroll key to select "DIRECT TUNING" from the SUB menu, then press the key. Press > on the remote repeatedly until the NUM menu appears, then select the numbers for the frequency, then press the key. 50 MHz Select 1 b 0 b 2 b 5 b 0 (You do not have to enter the last "0" when the tuning scale is set to 100 kHz. ) Example 2: AM 1, 350 kHz Select 1 b 3 b 5 b 0 (You do not have to enter the last "0" when the tuning scale is set to 10 kHz. If you cannot tune in a station and the entered numbers flash Make sure you have entered the right frequency. If the entered numbers still flash, the frequency is not used in your area. "Autobetical select" appears on the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the ones with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2character preset code. Regular FM stations are assigned 2character preset codes and stored after the RDS stations. When this process is finished, "Autobetical finished" appears on the display momentarily and the receiver returns to normal operation. Then you can easily tune in the stations you often listen to. Do not press any button on the receiver or supplied remote during autobetical operation, except ?If you move to another area, repeat this procedure to store stations in your new area. If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. " Tune in the station that you want to preset using Automatic Tuning (page 76) or Direct Tuning (page 76). Perform steps 5 and 6 before the display goes out. If you want to switch the memory page, press SHIFT on the remote. If "MEMORY" goes out before you select the preset number, start again from step 4. Each time you press the button, you can select a preset station as follows: If "MEMORY" goes out before you press MEMORY/ENTER, start again from step 4. [. . . ] refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. DECODE ERROR/CHECK CODE 01 Appears when a signal the receiver cannot decode (ex. Turn off the receiver, check the central core of a speaker cord is not touching the receiver or other speakers, and turn on again. [. . . ]