User manual SONY STR-DB795

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Initial setting: OFF Lets you output the test tone sequentially from each speaker. When set to "AUTO", the test tone is output from each speaker automatically. When set to "FIX", you can select which speaker will output the test tone. Initial setting: 0 (BALANCE) Lets you adjust the balance between front left and right speakers. Initial setting: 0 dB You can adjust from ­20 dB to +10 dB in 0. " appears in the display and all sound fields are reset to the initial setting. Initial setting: 0 dB Lets you increase the level of the MULTI CH IN sub woofer channel by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CH IN jacks. The sub woofer level from DVD players is 10 dB lower than Super Audio CD players. * Only when the surround back speaker is set to "SINGLE" in the SP SETUP menu. ** Only when the surround back speaker is set to "DUAL" in the SP SETUP menu. Initial setting: STD Lets you adjust the size of the surround effect. When one of the following sound fields are selected, no sound is output from the sub woofer if all the speakers are set to "LARGE" in the SP SETUP menu. However, the sound will be output from the sub woofer if the digital input signal contains LFE (Low Frequency Effect) signals, or if the front, center, or surround speakers are set to "SMALL". You can adjust the tonal quality (bass, treble level) of each speaker using the EQ menu. You can adjust various receiver settings using the CUSTOMIZE menu. Start playing a source encoded with multi channel surround effects (DVD, etc. Repeat steps 2 and 3 to adjust the other items. While monitoring the sound, rotate ­/+ to adjust the selected parameter. Repeat steps 3 and 4 to adjust the other items. You cannot adjust the equalizer when the system is decoding PCM 96 kHz signals, or when DTS 96/24, DTS-ES Matrix or DTS Neo:6 decoding is applied. The advanced parameters for the SP SETUP and LEVEL menus are displayed and can be adjusted. [. . . ] If the command mode of the receiver and the remote is different, you cannot operate the receiver with the remote. /1, the command mode switches between "C. Make sure you select the correct input on the remote. The signal strength of the stations is too weak (when tuning in with automatic tuning). [. . . ]