User manual SONY STR-DB798

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] You can select the surround back decoding mode only when A. How to select the surround back decoding mode You can select the surround back decoding mode you want according to the input stream. Surround back decoding is not performed. The Dolby Corporation web page can help you distinguish Surround EX films. C) Software encoded with a flag to denote it has both Surround EX and 5. 1 channel signals are DVD specific signals not used in movie theaters. E) When two surround back speakers are connected, the output channel will be 7. There may be no sound from the surround back speaker in Dolby Digital EX mode. Some discs have no Dolby Digital EX flag even though the packages have Dolby Digital EX logos. You can assign a component video input for another visual input. You can switch the audio input mode for components which have digital audio input jacks. Turn MENU to select the component video input you want to assign. Turn ­/+ to select the visual input you want to assign the component video input jacks selected in step 4. Gives priority to digital signals when there are both digital and analog connections. The input you can assign varies for each component video input. When signals with a sampling frequency of more than 48 kHz is input, the equalizer and sound field cannot be used. ⷠSome audio input modes may be dimmed depending on the input. You cannot assign a visual input to more than one component video input. By adjusting the LEVEL menu, you can customize the sound fields to suit your particular listening situation. Initial setting: 0 (BALANCE) Lets you adjust the balance between front left and right speakers. The setup items you can adjust in each menu vary depending on the sound field. certain setup parameters may be dimmed in the display. [. . . ] Remove any obstacles in the path between the remote and the receiver. ⷠReplace all the batteries in the remote with new ones, if they are weak. If the command mode of the receiver and the remote is different, you cannot operate the receiver with the remote. /1, the command mode switches between "C. [. . . ]