User manual SONY STR-DE245 annexe 1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or build-in cabinet. Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. Before operating the receiver, check that the operating voltage is identical with your local power supply. [. . . ] After the programme ends, the receiver switches back to the station you were listening to (or the function you were using). Turn off the EON feature when you want to record a programme without interruptions, especially when you want to do timer recording. To use this function, be sure to store the RDS stations beforehand. When the selected station has a weak signal, "WEAK SIG" appears and then, the receiver returns to the previous station or programme source. Programmes about national or regional culture, such as religion, language, and societal concerns. Easy listening (middle of the road music). Music that does not fit into any of the above categories, such as rhythm & blues and reggae. Programmes on recreational activities which listeners might participate. You can locate a station you want by selecting a programme type. The receiver tunes in the type of programmes currently being broadcast from the RDS stations stored in the receiver's preset memory. Press PRESET/PTY SELECT + or ­ until the programme type you want appears in the display. See the following table for the programme types you can select. press RDS PTY while the programme type appears in the display. The tuner starts searching the preset RDS stations for the programme ("SEARCH" and the programme type are displayed alternately). When the receiver finds the programme you are looking for, it stops searching. "NO PTY" appears when the programme type that you've selected is not being broadcast and the receiver returns to the original station. You can select the following programme types: Programme type Any programmes not defined below. Programmes about consumer affairs and professional advice (eg. This receiver makes it easy to record to and from the components connected to the receiver. You don't have to connect playback and recording components directly: once you select a programme source on the receiver, you can record and edit as you normally would using the controls on each component. Before you begin, make sure you've connected all components properly. For example, turn on the TV and TV tuner. [. . . ] To take full advantage of Dolby Pro Logic Surround, you should have one pair of rear speakers and a centre speaker. These jacks are used to input decoded Dolby Digital (AC-3) audio signals, allowing you to enjoy 5. Use these jacks to connect a Dolby Digital (AC-3) decoder or a DVD player with a built-in AC-3 decoder. Select PHANTOM mode if you have front and rear speakers but no centre speaker. [. . . ]