User manual SONY STR DE475 & STR-DE475,MV

[. . . ] 4-233-503-52(3) FM Stereo FM-AM Receiver Operating Instructions Mode d’emploi Gebruiksaanwijzing Bruksanvisning GB FR NL SE STR-DE475  2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] 2 PRO LOGIC Lights up when the receiver applies Pro Logic processing to two channel signals in order to output the center and surround channel signals. * * However, this indicator does not light if the center and surround speakers are set to “NO”, and the A. Or NORMAL SURROUND sound fields are selected. 7 OPT Lights up when the source signal is a digital signal being input through the OPT terminal. 8 Play back channel indicators The letters light up to indicate the channels being played back. L: Front Left R: Front Right C: Center (monaural) SL: Surround Left SR: Surround Right S: Surround (monaural or the surround components obtained by Pro Logic processing) The boxes around the letters light up to indicate the speakers used to playback the channels. See the next page for details regarding the playback channel indicators. 9 LFE LFE will light up when the disc being played contains the LFE (Low Frequency Effect) channel and when the sound of the LFE channel signal is actually being reproduced. Enjoying Surround Sound 3 DTS Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to ANALOG (see qa on page 22). 4 Tuner indicators These indicators light up when using the receiver to tune in radio stations, etc. See pages 34 – 39 for tuner operations. See page 32 to adjust the dynamic range compression. 6 COAX Lights up when the source signal is a digital signal being input through the COAX terminal. 28GB Source sound displays The letters (L, C, R, etc. The box around the letters varies to show how the receiver downmixes the source sound (based on the speakers settings). When using music sound modes such as HALL or JAZZ CLUB, the receiver adds reverberation based on the source sound. The following table shows how the indicators light up when using AUTO FORMAT DECODING mode. Although the table below shows almost all of the configurations available from multi channel surround signals, the ones marked “ ” are the most common. Recording Format (Front/ Surround) Source sound and Output Channel Display Input Channel Display All speakers present Surround speakers absent ; DIGITAL C Center speaker absent ; DIGITAL C Surround/center speakers absent ; DIGITAL C DOLBY DIGITAL [1/0] 1/0 DTS [1/0] DOLBY DIGITAL [2/0] 2/0* DTS [2/0] DOLBY DIGITAL [3/0] 3/0 DTS [3/0] DOLBY DIGITAL [2/1] 2/1 DTS [2/1] DOLBY DIGITAL [3/1] 3/1 DTS [3/1] DOLBY DIGITAL [2/2] 2/2 DTS [2/2] DOLBY DIGITAL [3/2] 3/2 DTS [3/2] 2/0** DOLBY DIGITAL [2/0] DOLBY PRO LOGIC PCM XX kHz*** * Signals with Dolby surround encoded flag OFF ** Signals with Dolby surround encoded flag ON *** The sampling rate is displayed. ; DIGITAL C C C C C dts dts L R dts L R dts L R Enjoying Surround Sound ; DIGITAL ; DIGITAL ; DIGITAL ; DIGITAL L R L R L R L R L R dts dts L C R dts L C R dts L C R ; DIGITAL ; DIGITAL ; DIGITAL ; DIGITAL L C R L C R L C R L C R L C R dts dts L S L R S L C S C S R L R dts L S R S L C S C S R L R dts L S R S L C S C S R L R ; DIGITAL ; DIGITAL ; DIGITAL ; DIGITAL L S R R S dts dts dts dts ; DIGITAL a DIGITAL a DIGITAL ; DIGITAL L C S C S R L R L R L R L R dts dts R SR R SR dts R SR R SR dts R SR R SR ; DIGITAL L SL L SL ; DIGITAL L SL L SL ; DIGITAL L SL L SL ; DIGITAL L SL L SL R SR R SR dts dts dts dts ; DIGITAL L C R SL SR L C R SL SR L C S R ; DIGITAL L C R SL SR L C R SL SR L C S R ; DIGITAL L C R SL SR L C R SL SR L C S R ; DIGITAL L C R SL SR L C R SL SR L C S R dts dts dts dts ; DIGITAL PRO LOGIC ; DIGITAL PRO LOGIC ; DIGITAL PRO LOGIC ; DIGITAL PRO LOGIC L PRO LOGIC C S R PRO LOGIC L C S R PRO LOGIC L C S R PRO LOGIC L C S R L R L R L R L R Notes • The receiver performs Pro Logic decoding and the display conforms to 2/0** when using the following movie sound modes with 2/0* or STEREO PCM format signals. ) • When using music sound modes such as HALL or JAZZ CLUB with standard audio formats e. [. . . ] See Automatic tuning Selecting component 23 sound field 25 Sleep timer 42 Sound field adjustable parameters 33 customizing 30 pre-programmed 25 - 27 resetting 32 selecting 25 Speakers adjusting speaker volume 18 connection 12 placement 16 Supplied accessories 4 Surround sound 24 - 33 B Basic receiver operations 20 - 23 Batteries 4 I, J, K Indexing. See Naming C Changing display 21 effect level 30 Checking the connections 19 Clearing receiver’s memory 14 Connecting. See Hookups Customizing sound fields 30 L, M Labeling. see Naming N , O Naming preset stations 41 program sources 41 D Demonstration mode 14 Digital Cinema Sound 47 Direct tuning 36 Dolby Digital (AC-3) 47 Dolby Pro Logic Surround 47 Dubbing. [. . . ]