User manual SONY STR-DE695

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] The EQ indicator in the display lights up when the equalizer is turned on. When you adjust the equalizer using the EQ parameters, the settings are applied to all sound fields and can be reproduced whenever you turn on the equalizer. Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Do not press any button on the receiver or supplied remote during autobetical operation. ⷠIf you move to another area, repeat this procedure to store stations in your new area. If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. For details on the buttons used in this section, see pages 44­51 for remote RM-PP412 and pages 52­55 for remote RM-U307. This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. Regular FM stations are assigned 2-character preset codes and stored after the RDS station. (You don't have to enter the last "0" when the tuning scale is set to 10 kHz. If you cannot tune in a station and the entered numbers flash Make sure you've entered the right frequency. If the entered numbers still flash, the frequency is not used in your area. If you don't know the frequency of the station you want, you can let the receiver scan all available stations in your area. If you do not remember the precise frequency, press TUNING + or TUNING ­ after entering the value close to the frequency you want. the receiver automatically tunes in the station you want. If the frequency seems to be higher than the entered value, press TUNING +, and if the frequency seems to be lower than the entered value, press TUNING ­. You will not be able to enjoy the stereo effect, but the sound will be less distorted. [. . . ] ⷠMake sure you select the correct input selector on the remote. ⷠIf the remote is set to operate the TV only, use the remote to select a source or component other than TV before operating the receiver or other component. If you are unable to remedy the problem using the troubleshooting guide Make sure that you're tuned to an FM RDS station. The RDS information that you want does not appear. [. . . ]