User manual SONY STR-DG300

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] This mode is selected automatically if you use headphone when A. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels. Outputs the analog signals without processing by the tone, sound field, etc. This mode is selected automatically if you use headphone when sound field for movie/music is selected. It allows you to experience a theater-like environment while listening through a pair of headphones. Sound fields with DC mark use DCS S technology. DCS is a unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful sound of movie theaters at home. With this "Digital Cinema Sound" developed by integrating a DSP (Digital signal processor) and measured data, the ideal sound field intended by film makers can be experienced at home. note This function does not work in the following cases: ­ ANALOG DIRECT is selected. ­ For signals with a sampling frequency of more than 48 kHz. Listening to the sound without any adjustment (ANALOG DIRECT) You can switch the audio of the selected input to two channel analog input. This function enables you to enjoy high quality analog sources. When using this function, only the volume and front speaker balance can be adjusted. Turn INPUT SELECTOR on the receiver to select the input you want to listen to in analog audio. You can also use the input buttons on the remote. Be sure to use the buttons on the receiver for this operation. You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 18). " appears on the display and all sound fields are reset to their initial setting. Press TUNING + to scan from low to high; press TUNING ­ to scan from high to low. The receiver stops scanning whenever a station is received. You can enter the frequency of a station directly by using the numeric buttons. [. . . ] If so, the service may be temporarily out of order. There is no picture or an unclear picture appears on the TV screen or monitor. ⷠMake sure you have connected the video output of your video component to the TV. ⷠMove your audio components away from the TV. [. . . ]