User manual SONY STR-DG810

[. . . ] 2-898-639-11(1) Multi Channel AV Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. STR-DG810 ©2007 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] Multi-channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers. x D. ASSIGN (Digital audio input assignment) Lets you assign the digital audio input to other input source. For details, see "Listening to digital sound from other inputs (DIGITAL ASSIGN)" (page 75). x NAME IN (Naming inputs) Lets you set the name of inputs. For details, see "Naming inputs" (page 76). continued 47US · TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes · The sound quality of the playback component depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play multi-channel software. · When you connect the receiver to a video component (projector, etc. ), sound may not be output from the receiver. In this case, select "AMP". Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the size and distance of the speakers connected to this system. Select "7-SYSTEM" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 39) and "Overview of the menus" (page 40). SYSTEM menu parameters x SW SPK (Sub woofer) · NO If you have not connected a sub woofer, select "NO". This activates the bass redirection circuitry and outputs the LFE signals from other speakers. · YES If you have connected a sub woofer, select "YES". Tip In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer's cut off frequency as high as possible. x CONTROL (HDMI CONTROL)* Lets you turn the HDMI CONTROL function on or off. For details, refer to the HDMI CONTROL Guide supplied with the receiver. x NAME IN (Naming inputs) Lets you set the name of inputs. For details, see "Naming inputs" (page 76). * When you select this parameter, the "HDMI" indicator flashes in the display. x FRT SPK (Front speakers) · SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to "SMALL", the center and surround speakers are also automatically set to "SMALL" (unless previously set to "NO"). · LARGE If you connect large speakers that will effectively reproduce bass frequencies, select "LARGE". When the sub woofer is set to "NO", the front speakers are automatically set to "LARGE". 48US x CNT SPK (Center speaker) · NO If you have not connected a center speaker, select "NO". The sound of the center channel will be output from the front speakers. · SMALL If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer. · LARGE If you connect a large speaker that will effectively reproduce bass frequencies, select "LARGE". [. . . ] · No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). · Press DISPLAY repeatedly on the receiver so that the frequency appears on the display. Additional Information continued 89US Remote commander The remote does not function. · Point the remote at the remote sensor on the receiver. · Remove any obstacles in the path between the remote and the receiver. [. . . ]