User manual SONY STR-DH810

[. . . ] 4-168-075-11(1) Multi Channel AV Receiver Operating Instructions STR-DH810 ©2010 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Note Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions of the component. Preparing for the "BRAVIA" Sync The receiver is compatible with the "Control for HDMI-Easy Setting" function. · If your TV is compatible with the "Control for HDMI-Easy Setting" function, you can set the Control for HDMI function of the receiver and playback components automatically by setting the TV (page 56). · If your TV is not compatible with the "Control for HDMI-Easy Setting" function, set the Control for HDMI function of the receiver, playback components and TV individually (page 57). If your TV is compatible with the "Control for HDMI-Easy Setting" function The Control for HDMI function of the receiver can be turned on simultaneously by turning on the Control for HDMI function of the TV. 1 Connect the receiver, TV and playback components via HDMI connection (page 24). (The respective components must be compatible with the Control for HDMI function. ) 2 Turn on the receiver, TV and playback components. 3 Turn on the Control for HDMI function of the TV. The Control for HDMI function of the receiver and all the connected components are turned on simultaneously. When the setup is completed, "COMPLETE" will appear. For details on setting the TV, refer to the operating instructions supplied with the TV. 56GB If your TV is not compatible with the "Control for HDMI-Easy Setting" function Playing back components with one-touch operation (One-Touch Play) By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/images from the connected components. When you set "PASS THRU" to "AUTO" or "ON", sound and images can be output only from the TV while the receiver remains in standby mode. When you start playback a connected component, the receiver and TV operation are simplified as follow: Receiver and TV Turns on (if in standby mode) r Switches to appropriate HDMI input Notes · Depending on the TV, the start of the content may not be output. · Depending on the settings, the receiver may not turns on when "PASS THRU" is set to "AUTO" or "ON". AMP MENU , V/v/B/b O MENU 1 Perform the steps given in "If your TV is compatible with the "Control for HDMIEasy Setting" function" (page 56). 2 Press AMP MENU. 3 Press V/v repeatedly to select "<HDMI>", then press HDMI", then press or b. or b. 4 Press V/v repeatedly to select "CTRL: 5 Press V/v repeatedly to select "CTRL ON". Control for HDMI function is turned on. "BRAVIA" Sync Features 6 Set the Control for HDMI function for the connected component to on. If the Control for HDMI function for the connected component is already set to on, you do not need to change the setting. For details on setting the TV and connected components, refer to the operating instructions of the respective components. Notes · Before you do the "Control for HDMI-Easy Setting" from the TV, be sure to turn on the TV, connected components and receiver. · If the playback components cannot function after you have made the settings for "Control for HDMIEasy Setting", check the Control for HDMI setting on your TV. · If the connected components do not support "Control for HDMI-Easy Setting", you need to set the Control for HDMI function for the connected components to on before you perform the "Control for HDMI-Easy Setting" from the TV. Tip You can also select a connected component, such as DVD/Blu-ray disc player using the TV menu. The receiver and TV will automatically switch to the appropriate HDMI input. 57GB Notes Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu. [. . . ] · Volume becomes minimum when you turn off the surround amplifier with headphones connected or if the radio reception is poor. In these cases, check the radio reception and adjust the volume level to restore sound from the headphones. Error messages If there is a malfunction, the display shows a message. You can check the condition of the system by the message. See the following table to solve the problem. [. . . ]