User manual SONY STR-DN1010

[. . . ] 4-174-068-11(1) Multi Channel AV Receiver Operating Instructions STR-DN1010 ©2010 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] ­ the front or surround speakers are set to "Small". ­ the sound field for movie is selected. ­ "Portable Audio" is selected. · The effects provided by the virtual speakers may cause increased noise in the playback signal. · When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. Enjoying Surround Sound x HP DIRECT (HP (Direct)) This mode is selected automatically if you use headphones when "Analog Direct" is selected. Outputs the analog signals without processing by the equalizer, sound field, etc. Tips · You can identify the encoding format of DVD software, etc. , by looking at the logo on the package. · Dolby Pro Logic IIx and Dolby Pro Logic IIz decoding are effective when multi channel signals are input. · Sound fields with D CS marks use DCS technology. For details on Digital Cinema Sound (DCS), see "Glossary" (page 117). If you connect a subwoofer This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from a subwoofer to a 2 channel signal. However, the low frequency signal is not generated for "Neo:6 Cinema" or "Neo:6 Music" when all speakers are set to "Large". In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the subwoofer's cut off frequency as high as possible. Notes on sound fields · Depending on the speaker pattern settings, some sound fields may not be available. · You cannot select PLIIx and PLIIz at the same time. ­ PLIIx is available only when the speaker pattern is set to a setting with surround back speaker(s). ­ PLIIz is available only when the speaker pattern is set to a setting with front high speakers. To turn off the surround effect for movie/music Press SOUND FIELD +/­ repeatedly to select "2CH ST. " or "A. F. D. You can also press 2CH/A. DIRECT repeatedly on the receiver to select "2CH ST. " or press A. F. D. repeatedly on the receiver to select "A. F. D. AUTO". 67GB When connecting Blu-ray disc players and other next generation HD players Digital audio formats that this receiver can decode depend on digital audio input jacks for the components connected. This receiver supports the following audio formats. Audio format Dolby Digital Dolby Digital EX Dolby Digital Plusa) Dolby TrueHDa) DTS DTS-ES DTS 96/24 DTS-HD High Resolution Audioa) DTS-HD Master Audioa)b) Multi channel Linear PCMa) Maximum number of channels 5. 1 6. 1 7. 1 7. 1 5. 1 6. 1 5. 1 7. 1 7. 1 7. 1 Connection of the playback component and the receiver COAXIAL/OPTICAL a a × × a a a × × × HDMI a a a a a a a a a a a) Audio signals are output in another format if the playback component does not correspond to the format. For b) Signals details, refer to the operating instructions of the playback component. with a sampling frequency of more than 96 kHz are played back at 96 kHz or 88. 2 kHz. 68GB Enjoying the surround effect at low volume levels (NIGHT MODE) This function allows you to retain a theater like environment at low volume levels. This function can be used with other sound fields. [. . . ] If so, the service may be temporarily out of order. a) b) Remote commander The remote does not function. · Point the remote at the remote sensor on the receiver. · Remove any obstacles in the path between the remote and the receiver. · Replace all the batteries in the remote with new ones, if they are weak. [. . . ]