User manual SONY STR-GX415 SERVICE MANUAL

[. . . ] ˎˎYou can record audio while the camera is in this unit, but the sound level is reduced. ˎˎThread a suitable cord through the attachment hole of this unit, then attach the cord to an item you intend to use with the camera. ˎˎWhen inserting the camera in this unit body, if the cord detaches from the case cover, attach it again. [. . . ] ˎˎDo not throw this unit into the water. ˎˎAvoid using this unit under the following situations: in ˋˋ a very hot or humid place. In these situations moisture condensation or water leakage may occur and damage the camera. ˎˎDo not leave this unit under direct sunlight or in a very hot and humid place for a long period of time. If you cannot avoid leaving this unit under direct sunlight, be sure to cover this nit with a towel or other protection. ˎˎWhen the camera overheats, it may automatically turn off or recording may malfunction. To use the camera again, leave it in the cool place for a while to cool down. ˎˎIf sun oil is on this unit, be sure to wash it off thoroughly using lukewarm water. If this unit is left with sun oil on its body, the surface of this unit may become discolored or damaged (such as cracks on the surface). ˎˎAfter recording in a location with a sea breeze, wash this unit thoroughly in fresh water with the buckle fastened to remove salt and sand, then wipe with a soft dry cloth. It is recommended that you submerge this unit in fresh water for about 30 minutes. If it is left with salt on it, metal portions may be damaged or rust may form and cause water leakage. ˎˎIf sun oil is on this unit, be sure to wash it off thoroughly using lukewarm water. ˎˎWipe the inside of this unit with a soft dry cloth. Be sure to perform the above maintenance each time you use this unit. Do not use any type of solvent such as alcohol, benzine or thinner for cleaning, as this might damage the surface finish of this unit. When storing this unit ˎˎTo prevent deterioration of the O-ring, store this unit in a cool, well-ventilated location. ˎˎPrevent dust from collecting on the O-ring. [. . . ] ˎˎAvoid storing this unit in a cold, very hot or humid place, or together with naphthalene or camphor, as these conditions might damage this unit. Vattenläckage O-ring Überprüfen auf Wasserlecks  Identifying the Parts 1 Cord attachment hole 2 Case body 3 Case cover 4 HOLD lever 5 REC button 6 NEXT button 7 PREV button 8 Tripod screw hole 9 Buckle lock 10 Buckle 11 Cord of the case cover Specifications Vor dem Einsetzen der Kamera in dieses Teil schließen Sie es und tauchen es in Wasser ein, und überprüfen Sie, ob Wasser eindringt. Included items :  aterproof Case (1), W Set of printed documentation Design and specifications are subject to change without notice. [. . . ]