User manual SONY STR-VA333ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When you select a function for which an audio input is assigned, the AUDIO SPLIT button lights up. ⷠYou can also select the audio input assigned with this function using INPUT MODE (page 42). The audio input you can assign varies for each function. for details , see "Selectable audio inputs for each function" below. Select "NO ASSIGN" if you do not want to assign any audio input to the selected function. You cannot use the AUDIO SPLIT function when the ANALOG DIRECT or MULTI CH DIRECT function is activated. If you do not press AUDIO SPLIT within 8 seconds, the receiver automatically assigns the audio input displayed in the display. You can switch the audio input mode for functions which have digital audio input jacks. You can also select the COAXIAL or OPTICAL audio inputs of other functions using the AUDIO SPLIT (page 41). The following is displayed instead of "AUTO 2CH" and "ANALOG 2CH FIXED". Whose audio input mode you want to switch. By adjusting the SURROUND menu and LEVEL menu, you can customize the sound fields to suit your particular listening situation. You can adjust from 0 % to 150 % in 5 % steps. The setup items you can adjust in each menu vary depending on the sound field. certain setup parameters may be dimmed in the display. This means that the selected parameter is either unavailable or fixed and unchangeable. You can customize the surround effects of the selected sound field. The settings are stored individually for each sound field. Initial setting: 0 dB Unlike the equalizer in the EQ menu (which lets you adjust the overall sound of each speaker), this parameter lets you adjust the bass gain level of each sound field. You can adjust from ­10 dB to +10 dB in 0. 1 Start playing a source encoded with Initial setting: 0 dB Unlike the equalizer in the EQ menu (which lets you adjust the overall sound of each speaker), this parameter lets you adjust the treble gain level of each sound field. You can adjust from ­10 dB to +10 dB in 0. [. . . ] ⷠWhen recording from a digital component, make sure the INPUT MODE is set to COAXIAL FIXED or OPTICAL FIXED (page 42) before recording with the component connected to the DIGITAL MD/DAT OUT terminals. POWER" to "ALWAYS ON" when ANALOG DIRECT is selected, for the digital audio signal is not output in "AUTO OFF" setting. The signal strength of the stations is too weak (when tuning in with automatic tuning). Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). [. . . ]