User manual SONY SU-B463S

[. . . ] Caution The use of optical instruments with this product will increase eye hazard. CAUTION -- INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM Information For customers in the USA DISPOSAL OF NICKEL METAL HYDRIDE BATTERY. NICKEL METAL HYDRIDE BATTERY. DISPOSE OF PROPERLY. You can return your unwanted nickel metal hydride batteries to your nearest Sony Service Center. Note: In some areas the disposal of nickel metal hydride batteries in household or business trash may be prohibited. [. . . ] T MARK 1 T MARK While playing the track with the track mark you want to erase, press X to pause. For example, to erase the third track mark, find the beginning of the third track. "00:00" appears in the display. "MARK" appears in the display for 2 seconds. "MARK OFF" appears in the display. The track mark is erased and the two tracks are combined. 2 1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. "MARK ON" appears in the display, and a track mark is added. The track number will increase by one. 3 To add track marks while recording Press T MARK on the recorder at the point you want to add a track mark. z When you erase a track mark, the date, time, and name assigned to the mark are also erased. 32 Moving recorded tracks You can change the order of the recorded tracks. Example Move track C from the third to the second track. Before moving 3 Flip the jog lever to select the destination track number. For the example above, "MV 003 t 002" appears in the display. The track moves to the selected destination track. 4 A B C D A C B D On the remote control DISPLAY Control After moving On the recorder Jog lever x 1 x T MARK Press DISPLAY for 2 seconds or more while playing the track you want to move. The track or disc is labeled. 34 Labeling a track during playback On the remote control DISPLAY PLAYMODE X Control 1 2 3 4 Insert a disc and play the track you want to label. Press the jog lever so that "EDIT" flashes in the display, and then press the lever again. " : Name" flashes in the display. Follow steps 4 to 6 of "Labeling a disc during stop". VOL +/­ x Labeling a disc during stop 1 2 3 4 Labeling a track or a disc during recording Insert a disc. To label a disc that is already in the recorder, press x to stop. " : Name" flashes in the display. or towards N · > to select a letter and press x to enter. The selected letter stops flashing and the cursor moves to the next input position. Press/ Turn X To Switch between capital letters, small letters, marks / numbers, and phrases. 1) Move the cursor to the left or right. Change the letter to the one before / next one. 1 2 While recording, press the jog lever so that "EDIT" flashes in the display, and then press the lever again. " : Name" flashes in the display. [. . . ] The recorder then decodes the signals and plays them back as music. Whether you should plug the headphones directly to i/LINE OUT on the main unit or to a remote control, use only headphones with stereo mini plugs. stereo mini plugs Recordable MDs Recordable MDs, which use magnetooptical (MO) technology, can be recorded again and again. The laser inside the recorder applies heat to the MD, demagnetizing the magnetic layer of the MD. The recorder then applies a magnetic field to the layer. This magnetic field corresponds exactly to the audio signals generated by the connected source. [. . . ]