User manual SONY SU-B551S

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Do not install other than the specified products. The following products are subject to change without notice, may be out of stock, or discontinued. [. . . ] The TV may overheat in such conditions which can cause deformation of the enclosure and/or TV malfunction. Warning To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install this equipment in a confined space, such as a bookshelf or similar unit. Please ensure that the AC power outlet (mains socket) is installed near the equipment and shall be easily accessible. Be sure to use the supplied AC adapter (mains adaptor) and AC power cords (mains lead). Do not use any other AC adapter (mains adaptor). Connect the AC adapter (mains adaptor) to an easily accessible AC power outlet (mains socket). Moisture may condense inside and may cause TV malfunction. Do not coil the AC power cord (mains lead) around the AC adapter (mains adaptor). The core wire may be cut and/or it may cause a malfunction of the TV. ­ Do not install the TV Stand in a place subject to direct sunlight or near a heater. Before connecting other components, be sure to turn off and unplug the TV Stand. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Cleaning To keep the TV Stand clean, occasionally wipe it with a dry soft cloth. Stubborn stains may be removed by wiping with a cloth slightly dampened with mild soap. Be sure to dry the area afterwards with a dry soft cloth. Do not use chemicals, such as thinner or benzine, as they damage the finish of the TV Stand. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Note on taking the TV Stand out from the carton Be sure to hold the TV Stand and handle it carefully. Step 1: Checking the parts TV Stand Neck Attachment Screw (PSW5 × 16) black (× 3) Joint Screw (PSW5 × 16) black (× 3) AC adapter AC power cord (mains lead) High Speed HDMI cable Cable holder Instructions manual Warranty card Do not put stress on the LCD panel and the frame around the screen. WARNING If you allow the AC power cord (mains lead) to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. [. . . ] ) transmitted from an HDMI jack (socket) may be suppressed by the connected component. Sound may be interrupted when the sampling frequency or the number of channels of audio output signals from the playback component is switched. When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT socket may be distorted or may not be output. We do not recommend using an HDMI-DVI conversion cable. [. . . ]