User manual SONY SU-FL300M

[. . . ] If the following precautions are not observed, serious injury or death through fire, electric shock, the product toppling over, or the product dropping can result. You may fall, or break the glass and cause injury. This product should only be installed by qualified Sony service representatives. Installation by other, non-qualified persons may result in serious injury, as the TV and the TV Stand are very heavy. [. . . ] This TV Stand is made of tempered glass, but care should be taken. Do not scratch or poke the glass with sharp-pointed objects. Do not install any equipment other than the specified product. This TV Stand is designed for use with the specified product only. If you install equipment other than specified, it may fall or break, and cause injury. Do not place anything hot directly on the TV Stand. Do not place anything directly on the TV Stand that may damage the glass. Do not place any equipment which exceeds the maximum weight for each shelf as indicated in the illustration. If the TV is not installed securely, it may fall, or the TV Stand may topple over, and cause injury. Do not apply weight to the glass or subject it to any kind of impact. Do not apply weight to the TV Stand with your hand when installing the TV. Be careful not to injure your hands or fingers during installation. Be careful not to pinch your fingers or hands when assembling the TV Stand and installing the TV. Glass shelf support Hook Hook screw (+PSW5 × L16) Screw (+PSW5 × L25) Anchor attachment Be sure to install the TV securely following the instructions. If the TV is not installed securely, it may fall and cause injury. Be sure to have a Phillips screwdriver that fits the screws indicated above prior to the assembly. If you allow the mains lead to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. If you stumble over the mains lead or the connecting cable, the TV Stand may topple over and cause injury. Decide on the installation location and lay the TV Stand down before installing the TV. Since the TV is heavy, it is recommended that you decide on the installation location and lay the TV Stand down before installing the TV. Detach the front and rear pillar support panels from the centre pillar. Rear pillar support panel Front pillar support panel Be sure that two or more persons assemble the TV Stand. [. . . ] Attach the glass shelves to the TV Stand with the "caution" label at front right, as shown in the illustration. Be sure to take measures to prevent the TV Stand from toppling over, otherwise, the TV may topple over and cause injury. Prepare a strong, commercially-available rope or chain and wall anchor bracket for this purpose. 1 Secure the wall anchor bracket to a solid wall or pillar. [. . . ]