User manual SONY SU-PW1

[. . . ] to Customers Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony dealers or contractors and pay adequate attention to safety during the installation. If the safety precautions are not observed and the product is used incorrectly, it may result in a fire or serious injury. This instruction manual shows the important precautions necessary to prevent accidents and to promote the correct handling of the product. [. . . ] Be sure to subcontract the installation to Sony dealers or contractors and pay adequate attention to safety during the installation. The following instructions are for Sony Dealers only. Be sure to read safety precautions described above and pay adequate attention to safety during the installation, maintenance and checking of this product. Be sure to install the Wall-Mount Bracket securely to the wall following the instructions in this instruction manual. If any of the screws are loose or fall out, the Wall-Mount Bracket may fall and cause injury or property damage. Be sure to use the appropriate screws for the material of the wall and install the unit securely, using eight or more M8 or the equivalent screws. If the Power Cord or the Display Cable is pinched between the unit and the wall or is bent or twisted by force, the metallic part of the cord or cable may be exposed and cause a short circuit or a break in the cord or cable. Be sure to use the supplied screws and attachment parts properly following the instructions given in this instruction manual. If you use substitute items, the Display Unit may fall, and cause bodily injury to someone or damage to the Display Unit. Be sure to assemble the bracket properly following the instructed procedure explained in this instruction manual. If any of the screws are loose or fall out, the Display Unit may fall, and cause bodily injury to someone or damage to the Display Unit. If you fail to do so, the Display Unit may fall, and cause bodily injury to someone or damage to the Display Unit. Be careful not to subject the Display Unit to shock during installation. If the Display Unit is exposed to shock, it may fall or break apart. Be sure to install the Display Unit on a wall that is both perpendicular and flat. If you fail to do so, the Display Unit may fall and cause injury. If people or objects get tangled in the cables, this may result in injury. Be careful not to hurt your hands or fingers during the installation. Be careful not to hurt your hands or fingers when installing the Wall-Mount Bracket or the Display Unit. The screws needed to secure the Wall-Mount Bracket to the wall are not supplied. Use the appropriate screws for the wall material and structure when mounting the Wall-Mount Bracket. Step 1: Check the parts required for the installation Prepare a Phillips driver and the appropriate screws (eight or more M8 or the equivalent screws, not supplied), depending on the material of the wall, beforehand. [. . . ] Be careful not to hurt your hands or fingers when removing the Display Unit. 0 kg (17 lb 10 oz) Design and specifications are subject to change without notice. ("Sony") warrants this product against defects in material or workmanship, subject to any conditions set forth as follow: 1. This warranty is expressly limited to the replacement of Sony Wall-Mount Bracket parts and components. [. . . ]