User manual SONY SU-RG11MA

[. . . ] This TV stand is designed for use with the Sony LCD projection TV. It is designed with a shelf for a VCR or other equipment. [. . . ] At least two people are required to assemble the TV stand safely. ⷠTake care not to pinch your fingers when installing the glass shelf or top panel. ­ If you install the stand on a soft surface such as a mat, first lay a board under the stand. ­ Do not install the stand in a place subject to direct sunlight or near a heater. When moving the stand ­ Two people or more are required. The parts on the bottom of the rear pillar may damage the floor. This stand uses "tempered" glass with an anti-scatter film, but care should still be taken. If the glass breaks, glass fragments could fly off and cause injury, so observe the precautions below. Do not scratch the glass or tap it with a sharp edged instrument. ⷠBe careful not to hit the glass shelf with a hard object, such as a vacuum cleaner, etc. [. . . ] Run the unit cord through the rear pillar hole. ⷠIf the cords are not installed properly, they might be pinched and damaged, and electric shock, etc. [. . . ]