User manual SONY SU-RS11X/B TV STAND - INSTRUCTIONS

[. . . ] If you do so, the stand may discolor or distort. â· Do not place things that may scratch the glass. ) on the glass shelf, make sure the device is not larger in width and length than the glass shelf itself. [. . . ] ) on the glass shelf, make sure the device is not larger in width and length than the glass shelf itself. Otherwise, the device may fall from the shelf, or ventilation holes may be blocked causing heat buildup inside the device, which could result in a malfunction or fire. â· To keep the stand clean, occasionally wipe the stand with a dry, soft cloth. Stubborn stains may be removed with a cloth slightly dampened with a solution of one part mild soap and five or six parts water, then wipe it with a dry soft cloth. Do not use any type of chemicals, such as thinner or benzine, as they may damage the finish of the stand. Do not lean or hang from the TV when it is placed on the TV stand, since the TV may fall and cause injury. A) Do not pinch the AC power cords of the TV or other equipment. Following the instructions in this manual, slide the TV legs into the stopper and use the support belt to prevent the TV from toppling over. Do not place any equipment which exceeds the maximum weight for the top panel or the shelf as indicated in the illustration. Otherwise, the top panel or the shelf may break. Prepare a Phillips screwdriver before assembling the stand. Design and specifications are subject to change without notice. At least two people are required to assemble the TV stand safely. Take care not to pinch your fingers between the top panel and TV when you install the TV on the stand. [. . . ] Design and specifications are subject to change without notice. At least two people are required to assemble the TV stand safely. Take care not to pinch your fingers between the top panel and TV when you install the TV on the stand. [. . . ]