User manual SONY SU-RS52U PRECAUTIONS FOR INSTALLING A TV

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. 60 Advanced Playback Operations Playing back a tape with picture effects . 62 Playing back a tape with digital effects . [. . . ] LINK cable (DV connecting cable) is connected to your camcorder You cannot add a sound to a recorded tape. To add new sound more precisely Press ZERO SET MEMORY at the point where you want to stop recording later in the playback mode. Recording automatically stops at the point where ZERO SET MEMORY was pressed. We recommend you to add new sound on a tape recorded with your camcorder If you add new sound on a tape recorded with another camcorder (including DCR-TRV8E/ TRV10E), the sound quality may become worse. LINK cable (DV connecting cable) to your camcorder during recording The recording may stop. If you use a tape with cassette memory, you can superimpose the title while recording or after recording. When you play back the tape, the title is displayed for five seconds from the point where you superimposed it. You can select one of eight preset titles and two custom titles (p. You can also select the colour, size and position of titles. 1 Turn the SEL/PUSH EXEC dial to select the colour, size, or position, then press the dial. 3 Repeat steps 1 and 2 until the title is laid out as desired. The characters you have entered remain stored in memory. Set the POWER switch to OFF once and then to CAMERA again, then proceed from step 1. We recommend setting the POWER switch to VTR or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. If you use a tape with cassette memory, you can label a cassette. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label is displayed on the LCD screen, in the viewfinder, or on the TV screen. (6) Turn the SEL/PUSH EXEC dial to select the column of the desired character, then press the dial. (7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the dial. In step 6 turn the SEL/PUSH EXEC dial to select [C], then press the dial. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you use a cassette set to prevent accidental erasure You cannot label it. [. . . ] Memory Flash memory 4MB: MSA-4A Operating voltage 2. 14 oz) Design and specifications are subject to change without notice. This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this "GENUINE VIDEO ACCESSORIES" mark. [. . . ]