User manual SONY SVE1513RCXB VAIO® USWER GUIDE (PRINTABLE)

[. . . ] Most cable companies use STD. NN If you have connected your TV to a cable or satellite set top box, you do not need to run the Auto Program function. ▶ English ■■ Auto Program OO MENUm → Broadcasting → Auto Program → ENTERE Scans for channels automatically and stores them in the TV’s memory. To start Auto Program, follow these steps: 1. Select Auto Program, and then press ENTERE. 2. Press the ENTERE button to select Start. 3. Select Both, Air, or Cable by highlighting, and then pressing ENTERE. ◀ ▶ English 4. If you selected Cable, you must specify your cable systems. [. . . ] ●● Select USB and have the TV play back photo or audio files from a USB ▶ English NN If you select a source other than TV or USB, you must: goes on ●● Leave the set-top box turned on. NN When you select a source other than TV or USB, the Antenna and Channel options will disappear. Antenna (when the Source is set to TV): Select Air or Cable. ●● Have a cable or satellite set-top box attached to that source ●● Set the set-top box to the channel you want to watch when the TV ◀ Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing the music or photo files you want to play when the TV turns on automatically. ▶ English NN If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not operate correctly. NN If there is only one photo file in the USB, the Slide Show will not play. NN A folder with a name that is too long cannot be selected. NN Each USB device you use is assigned its own folder. When using more ◀ than one of the same type of USB device, make sure the folders assigned to each USB device have different names. NN We recommend that you use a USB memory stick or a multi card reader when using On Timer. ▶ The On Timer function may not work with USB devices that have a builtNN in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. English ●● Off Timer: You can set up three separate Off Timer configurations. NN You must set the clock before you can use Off Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your TV. Time: Set the hour, minute, and am/pm. Use the number buttons or the ▲/▼ buttons to enter numbers. When the Confirm screen appears, press the Close button. The TV has memorized your new PIN. NN Whenever you access the Change PIN function, the PIN input screen ◀ appears. Enter the current or default PIN. NN The default PIN number for a new TV set is “0-0-0-0”. NN If you forget the PIN code, press the remote control buttons in the following ▶ sequence in Standby mode. This resets the PIN to “0-0-0-0” : MUTE → 8 → 2 → 4 → POWER (on) English ■■ General OO MENUm → System → General → ENTERE ●● Game Mode: When you have connected a game console such as a PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming experience if you set Game Mode on. NN NOTE ◀ ●● Precautions and limitations for Game Mode: –– Before disconnecting a game console and connecting another external device, set Game Mode to Off. ▶ –– If you display the TV menu in Game Mode, the screen shakes slightly. English turn Game Mode on before you have attached the game console, you may notice reduced picture quality. ●● If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie. ●● Panel Lock: Lock or unlock all the keys on the panel. ●● Boot Logo: Enable/disable displaying the logo while the TV starts up. ●● Game Mode is not available when you’ve set the input source to TV. ●● Set Game Mode to On only after connecting a game console. [. . . ] Use ▲/▼/◄/► buttons to select characters, and then select Done. English ❑❑ Using the DLNA Functions (AllShare™) for PDP 4900 series Via your network, you can play videos, photos, and music saved on your mobile phone or on other devices (such as your PC) through your TV, and control playback using controls on the TV via the network. NN NOTE ◀ ●● This model only supports the DLNA function in AllShare™. ●● First, connect your TV to your network. For detailed network connection ▶ instructions, refer to “Network Settings”. ●● For more information, visit “www. samsung. com” or contact the Samsung call center. [. . . ]