User manual SONY SVE171390X VAIO® USWER GUIDE (PRINTABLE)

[. . . ] ●● Press the E-MANUAL button on the standard remote control. ●● Press the MORE button on the Smart Touch Control to display control buttons on the screen. Flick the Touch Pad until e-Manual appears and select it. "" Words in blue refer to screen menu options and words in light blue refer to remote control buttons. "" A printable version of this guide is also available at www. samsung. com/support. Scrolling a Page To scroll a page, use of one of the following methods: ●● Press the or button on the scroll bar at the right edge of the screen. ●● Drag or flick up or down the line on either the left or right edge of the touchpad. [. . . ] Normal applies a normal level of volume adjustment, whereas Night applies a slightly lower volume level than Normal and is ideal for nighttime TV viewing. To use the volume control of a connected source device, deactivate the Auto Volume function. When using the Auto Volume function with a source device, the device’s volume control may not function properly. TV Installation Type Screen Menu > Sound > Speaker Settings > TV Installation Type Try Now This TV can produce slightly different sound according to how the TV is installed. Choose either Stand or Wall Mount. 3D Audio Screen Menu > Sound > 3D Audio Try Now This TV can make the sound more immersive to match it with 3D video. When watching 3D video, open the Sound menu, choose 3D Audio, and then choose a 3D sound level. Sound Reset Screen Menu > Sound > Reset Sound Try Now This resets all sound settings to the factory defaults. Speaker Settings If the TV's audio is sent to an external device such as a home theatre system, you can designate which speakers to use and make adjustments to eliminate decoding speed echoes. Speaker Select Screen Menu > Sound > Speaker Settings > Speaker Select Try Now Sound Sound Mode Sound Effect 3D Audio Speaker Settings Additional Settings Reset Sound Low Standard "" The displayed image may differ depending on the model. You can choose which speakers to use from among available several speakers. To use both the TV speakers and the AV receiver speakers simultaneously, set this option to TV Speaker. If there is a delay between the two sounds, choose any other than TV Speaker to mute the TV speakers. "" Using the external speakers only disables the volume button and the mute function. In addition, certain Sound options will be disabled. Additional Settings Screen Menu > Sound > Additional Settings Try Now Configure additional settings for optimum audio output. DTV Audio Level Screen Menu > Sound > Additional Settings > DTV Audio Level Try Now (Digital channels only) The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use this to set the digital audio volume at a comfortable level. The current time will be set through a network, if the TV fails to receive the time information including the broadcast signal from TV stations. (ex: Watching TV via set-top box, Satellite receiver, or etc) Manual Manually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the current time and date. Clock Set: Set the current Date and Time. Try Now Time Zone: Select your time zone. "" This function is only available when the Clock Mode is set to Auto. DST: Switches the DST (Daylight Saving Time) function on or off. "" This function is only available when the Clock Mode is set to Auto. "" When Country is set to Others, you can use this function. Sleep Timer Screen Menu > System > Time > Sleep Timer Try Now This function automatically shuts off the TV after a preconfigured period of time. You can set the timer up to 180 minutes in 30 minute increments. On Timer Screen Menu > System > Time > On Timer Try Now Set the On Timer so that the TV turns on automatically at a chosen time. Only three On Timer settings can run concurrently. [. . . ] The browsing screen may differ from the one on your computer. The web browser is not compatible with Java applications. If you attempt to download a file, you will receive an error message instead. The web browser may not be able to access certain websites. [. . . ]