User manual SONY SVR-2000 SU

[. . . ] 3-060-082-01 (1) ©2000 by Sony Corporation. Reproduction in whole or in part without written permission is prohibited. All rights reserved. Please use this manual first. TiVo, TiVo Central, and the TiVo logo are trademarks of TiVo Inc. TiVo Inc. , 894 Ross Drive, Sunnyvale, CA 94089. WARNING To reduce the risk of fire or shock hazard, do not expose the unit to rain or moisture. Owner's Record The model and serial numbers are located on the back of the SVR Recorder. [. . . ] If you make a mistake, you can go back to a prior screen and fix it using the LEFT ARROW. You can also change or add to your setup information later without doing the complete Guided Setup process. Refer to your TiVo Viewer's Guide for details. Setting Up Your System · For questions about Guided Setup, service and activation, contact TiVo Customer Care: 1-877-367-8486 http://www. tivo. com Guided Setup 41 Note Antenna users: TiVo uses the channel lineup of a nearby cable system to determine which channels you receive. If there is no cable company that serves your Zip Code, enter the Zip Code of a nearby community. TiVo will automatically make sure the channel numbers are correct for the broadcast stations. Step-by-Step Instructions Guided Setup walks you through the steps necessary for your particular programming source (antenna, cable, satellite, etc. ) and equipment configuration. Depending upon your program source, you may not encounter all of the Guided Setup screens. The first step is to specify what kind of television programming source you have. If you have more than one source of programming (for example, both satellite and cable), you can choose that here. Press the UP/DOWN arrows on the Remote Control to highlight your program source(s), then press SELECT to choose that option and move to the next screen. If you have a cable A/B system, you can only pick one to watch with your SVR Recorder. See "Connecting Your Equipment" on pages 15­39 for information about splitting your signal in order to watch the other channels. If you chose cable as your program source, do you have a set-top cable box, or does your cable come straight out of your wall and into your TV?If you chose satellite as your programming source, did you connect the control cable to a serial jack on the back of your satellite set-top box, or did you use the IR Control cable?A serial connection is preferable, if your satellite box has a serial jack available. 42 Guided Setup Zip Code. Use the number keys on the Remote Control to enter your Zip Code. TiVo uses your Zip Code to determine which cable and/or satellite companies serve you, or to get a list of broadcast channels for antenna users. TiVo uses this information to be sure your TV listing information is correct. Choose whether your area observes daylight saving time or not. TiVo uses this information to be sure your TV listings are correct, as some areas don't observe daylight saving time. Use the number keys on the Remote Control to type your area code. TiVo uses your area code to determine the local dial-in numbers available to you. Setting Up Your System Guided Setup 43 Phone Dialing Options. If your phone system requires special dialing options and you need to change the default settings the Recorder uses to dial out, you may choose "Yes" to do that here. [. . . ] This equipment should not be used on party lines or coin phones. 2 If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is not done, the telephone company may temporarily disconnect service. 3 The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. You will be advised of your right to file a complaint with the FCC. 4 If the telephone company requests information on what equipment is connected to their lines, inform them of: a. The telephone number to which this unit is connected. [. . . ]