User manual SONY SXAVR30

[. . . ] 5 Objects and liquid entry -- Take care that objects or liquids do not get inside the unit through the ventilation openings. 6 Carts and stands -- When placed or mounted on a stand or cart, the unit should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit or cart to overturn or fall. [. . . ] 7 En Check your system and accessories SX-AVR30 Sub woofer: SX-AVR30 (1) Satellite speakers Front: SX-AVR30F (2) Centre: SX-AVR30C (1) Rear: SX-AVR30R (2) Sub woofer connecting cord : 1 Speaker cord : 1, 30 metres of 20 gauge Operating instructions, etc. ENGLISH 3 BEFORE USE This speaker system consists of a sub woofer and satellite speakers (front, centre and rear speakers). The satellite speakers have the same appearance. See the back of the speakers to check the sort of the speakers, front, centre and rear. SPECIFICATIONS [Sub woofer: SX-AVR30] Input terminal: INPUT jack Input sensitivity/impedance: 1 V/33 kohms (at 100 Hz) Power output: 55 W (4 ohms, T. H. D. 10% at 100 Hz) 117 W (DIN MUSIC POWER) Frequency response: 20 Hz - 450 Hz Speaker type: Bass reflex, magnetically shielded Speaker unit: 200 mm cone Power requirement: AC 230 V, 50 Hz Power consumption: 55 W Dimension(W × H × D): 280 × 417 × 395 mm Weight: 9. 5 kg [SUB WOOFER] On AC voltage The rated voltage of the unit shown on the rear panel is 230 V AC. Check that the rated voltage matches your local voltage. Howling or buzzing sound A howling or buzzing sound may be heard if a turntable or a stereo system is placed near the unit. Move the unit away from the equipment or decrease the volume. [SATELLITE SPEAKERS] Speaker's impedance The speaker's impedance is 8 ohms. Make sure that the connected receiver is equipped with 8-ohms output speaker terminals such as AIWA AV-NW50/51 and AV-NW30/31. [Satellite speakers: SX-AVR30F/C/R] Full-range, 80 mm, bass reflex type, magnetically shielded (except rear) Impedance: 8 ohms Maximum input power: 100 W (peak) Dimension (W × H × D): 98 × 143 × 115 mm Weight: 0. 7 kg Accessory: Sub woofer connecting cord (1), Speaker cord, 30 metres of 20 gauge (1) Speaker: Speaker's L/R Either of the two front and rear speakers can be connected to R (right) or L (left) terminals. [COMMON] Using the unit near a TV set Although the unit is magnetically shielded (except rear speakers), there may be cases in which the picture on some TV sets may become magnetically distorted. - If the TV picture is distorted, turn off the power of the TV set and turn it on again after 15 to 30 minutes. - If there seems to be no improvement, move the unit further away from the TV set. - Furthermore, do not place magnets or objects using them, such as audio racks, toys near the TV set. These may cause magnetic distortion due to interaction with the unit. Specifications and external appearance are subject to change without notice due to product improvement. Keep away magnetic items Keep cassette tapes, personal credit cards etc. using magnetic cording away from the unit. The recorded information may be damaged or some noise may be added. 4 ENGLISH POSITIONING En Position the speakers according to the following recommendations to maximize your Home Theater experience. Refer to the operating instructions of the receiver as well. Using a speaker mounting kit (not supplied) Each speaker (except sub woofer) is equipped with a "M5" threaded insert on the back. [. . . ] AUTO POWER: Switches AUTO POWER function on and off. When the function is set to ON: - The power is automatically turned off and the unit enters the standby mode when receiving no signals for about 12 minutes. - The power is automatically turned on when receiving the signal input again. [. . . ]