User manual SONY TA-DA9000ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Initial setting: 0 dB Lets you increase the level of the MULTI CHANNEL INPUT 1/MULTI CHANNEL INPUT 2 sub woofer channel by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CHANNEL INPUT 1/MULTI CHANNEL INPUT 2 jacks. The sub woofer level from DVD players is 10 dB lower than Super Audio CD players. * Only when the surround back speaker is set to "SINGLE" in the SPEAKER SET UP menu (page 19). ** Only when the surround back speaker is set to "DUAL" in the SPEAKER SET UP menu (page 19). While monitoring the sound, rotate ­/+ to adjust the selected parameter. Repeat steps 3 and 4 to adjust the other parameters. Initial setting: OFF Lets you output the test tone sequentially from each speaker. When set to "AUTO", the test tone is output from each speaker automatically. When set to "FIX", you can select which speaker will output the test tone. Initial setting: 0 (BALANCE) Lets you adjust the balance between front left and right speakers. You can adjust from ­8 dB to +8 dB in 0. When one of the following sound fields are selected, no sound is output from the sub woofer if all the speakers are set to "LARGE" in the SPEAKER SET UP menu. However, the sound will be output from the sub woofer if the digital input signal contains LFE (Low Frequency Effect) signals, or if the front or surround speakers are set to "SMALL". Initial setting: 0 dB You can adjust from ­20 dB to +10 dB in 0. Initialize" appears in the display and all sound fields are reset to the initial setting. You can adjust the tonal quality (bass, midrange, treble level) of each speaker using the EQUALIZER menu. You can store up to 5 different equalizer settings in the equalizer bank (EQ BANK [1] ­ [5]) and apply them. Start playing a source encoded with multi channel surround effects (DVD, etc. While monitoring the sound, rotate ­/+ to adjust the selected parameter. Repeat steps 5 and 6 to adjust the other items. Initial setting: 0 dB You can adjust from ­10 dB to +10 dB in 1 dB steps. [. . . ] There is no picture or an unclear picture appears on the TV screen or monitor. Move your TV away from the audio components. ⷠConnect your TV to the receiver using the same type of connecting cord as the one used to connect the receiver and video component (pages 7 and 10). Remove any obstacles in the path between the remote and the amplifier. [. . . ]