User manual SONY TA-N7 service manual

[. . . ] You can also add audio from a variety of audio sources when editing a video tape. * See your VCR or LD player's instruction manual if you need help. For example, insert the laser disc you want to record from into the LD player. insert a blank video tape into the VCR for recording. [. . . ] select the appropriate surround mode as follows: To Decode programmes processed with Dolby Surround and create the atmosphere of a movie theatre. Create a simulated surround sound from monaural sources such as old movies or TV programmes. To turn off surround sound You can find Dolby Surround-encoded software by looking at the packaging However, some videos and laser discs may use Dolby Surround sound even if it's not indicated on the package. Each mode is designed for a different speaker configuration. The test tone feature lets you set the volume of your speakers to the same level. You can only use the test tone when the surround mode is set to Pro Logic. Using the controls on the remote lets you adjust the volume level from your listening position. The CENTER MODE indicator may not light immediately when using SURROUND MODE on the amplifier to select the PRO LOGIC. Press CENTER MODE repeatedly until the indicator for the centre mode you want lights in the display. You will hear the test tone from each speaker sequentially. Adjust the volume level so that the test tone from each speaker is at the same level from your listening position. No picture or a scrambled picture from the connected Pay-TV decoder. / Replace both batteries in the remote with new ones if they are weak. / Make sure you select the correct function on the remote. No sound is heard from the centre speaker. Design and specifications are subject to change without notice. To obtain the best possible surround sound, select one of the following four centre modes according to your speaker system. Select 3 CH LOGIC mode if you have front and centre speakers but no rear speaker. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound without using rear speakers. Select NORMAL mode if you have front and rear speakers and a small centre speaker. Since a small speaker cannot produce enough bass, the bass sound of the centre channel is output from the front speakers. Front speaker (R) Decoding system of Dolby Surround sound standardized in TV programmes and movies. [. . . ] Select WIDE mode if you have front and rear speakers and a large centre speaker. With the WIDE mode, you can take full advantage of Dolby Surround sound. Dolby Surround decodes the extra channels on the Dolby Surround-encoded sound tracks of movie videos and TV programmes and produces sound effects and echoes that make the action seem to envelop you. the amplifier offers Dolby Surround (PRO LOGIC) as one of the pre-programmed sound fields. [. . . ]