User manual SONY TA-VA777ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Should any solid object or liquid fall into the cabinet, unplug the amplifier and have it checked by qualified personnel before operating it any further. Before operating the amplifier, check that the operating voltage is identical with your local power supply. [. . . ] Use the buttons on the front panel to operate the following modes Button) Automatically detects the type of audio signal being input (Dolby Digital, DTS, Dolby Pro Logic, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects. Outputs the sound from the front left and right speakers only. Standard two channel (stereo) sources completely bypass the sound field processing. Multi channel surround formats are downmixed to two channels. the analog input signal is not digitally processed. Only volume control functions can be used. Set the equalizer to OFF while using this mode to hear the source sound exactly as it was recorded. This allows you to play any source using only the front left and right speakers. When inputting two channel (stereo) sources, sound is output from the front left and right speakers and a sub woofer under AUTO FORMAT DECODING mode. To avoid sound output from the sub woofer, select the 2 CHANNEL mode. 1 OPTICAL Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 2 COAXIAL Lights up when the source signal is a digital signal being input through the COAXIAL terminal. 3 a DIGITAL This indicator lights when the sound field is on and the unit is decoding signals recorded in the Dolby Digital (AC-3) format. 4 Playback channel indicators The letters light to indicate the channels being played back. L: Front Left R: Front Right C: Center LS: Left Surround RS: Right Surround S: Surround (monaural or the rear components obtained by Pro Logic processing) The boxes around the letters light to indicate the speakers used to playback the channels. " light up when the disc being played contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. WOOFER Lights when the sub woofer selection is set to "YES" and sound is being output from the sub woofer. 7 MEMORY Lights when a sound field preset is saved in memory. 9 PRO LOGIC Lights when this unit applies Pro Logic processing to two channel signals in order to output the center and surround channel signals. [. . . ] Selecting component 22 sound field 27 Sound field adjustable parameters 34~36 customizing 44, 45 pre-programmed 28~30 resetting 45 selecting 27 Speakers adjusting speaker volume 19 placement 16 Supplied accessories 4 Surround sound 16~19 Changing effect level 39 Checking the connections 20 Clearing amplifier's memory 15 Connecting. Si les deux enceintes ne sont pas placées à égale distance de la position d'écoute, réglez sur la distance de l'enceinte la plus proche. Si les deux enceintes ne sont pas placées à égale distance de la position d'écoute, réglez sur la distance de l'enceinte la plus proche. Quand vous utilisez plusieurs appareils munis d'un système de commande à distance bidirectionnelle en même temps, veillez à les installer près les uns des autres de manière à faciliter un pilotage à distance correcte. [. . . ]