User manual SONY TC-TX373

[. . . ] This system is equipped with the Dolby* B-type noise reduction system. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Here are some of the features you can use with this tape deck when connected with the DHC-MD373/333 Mini Hi-Fi component system (see page 4). The tape deck power is tied with the DHC-MD373/333 component system (see page 11). [. . . ] for details , refer to "Wake up to music" in the DHCMD373/333 component system Instruction Manual. When you set the Wake-up timer, DOLBY NR must be set on the tape deck. The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tape, since the tape deck automatically detects the tape type. * This tape deck is equipped with the Dolby B-type noise reduction system. The AMS feature may not work in the following cases: -- the blank space between tracks is four seconds or less. -- the sound source recorded on the right channel is different from that on the left channel as with a KARAOKE tape. -- low volume or low sound continues for a long time. If you want to record starting from the bottom side, press h (for the bottom side) so the indicator on the h button lights up. If the tape reaches the end of the top side part-way through a track, the tape rewinds and the track is recorded again from its start. After that, recording starts with that track from the beginning of the bottom side during both sides recording, or recording stops during one side recording. When you press `/1 (power) on the tape deck, only the tape deck turns on. Inserting the tape when the power is off automatically turns on the tape deck only. Press `/1 (power) on the DHC-MD373/333 to turn on the DHC-MD373/333 component system before recording. â· The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted. â· When you want to reduce the hiss noise in low-level high-frequency signals, set DOLBY NR to ON before step 5. â· If the tape reaches the end of the top side during both sides recording, the fadeout feature prevents the track from ending abruptly at the end of the tape (Fade Synchro) (DHC-MD333 only). The track is recorded again from the beginning of the bottom side. With the side you want to record on facing up Set it to s to record on both sides. If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. You cannot listen to other sources while recording. â· When you record on both sides, be sure to start from the top side. [. . . ] If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. However, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape. If you have any questions or problems concerning your tape deck, please consult your nearest Sony dealer. If you run into any problem using this tape deck, use the following checklist. [. . . ]