User manual SONY TC-TX5

[. . . ] You can switch from another source to the tape deck and start playing a cassette just by pressing · You can wake up to music or record a radio programme at a preset time. for detail , refer to the sections "Waking up to music" and "Timer-recording radio programmes" in the instructions manual of the DHC-MD5 component system. However, perform the following settings on the tape deck. [. . . ] With this procedure, you can record a CD just the songs as you like, or start recording from the middle of the tape. You can also record a radio programme or MD on the tape. * Select this indication when you record the sound of the connected VCR or video game. With the side you want to record facing upward If you want to record from the reverse side, press ª (for reverse side) so that the lamp on ª lights up. ⷠWhen you want to reduce the hiss noise in lowlevel high-frequency signals, set DOLBY NR to ON before step 5 . Before operating the tape deck, check that the operating voltage of your tape deck is identical with the voltage of your local power supply. To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated. If you later want to reuse the tape for recording, cover the broken tab with adhesive tape. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. ⷠUnplug the tape deck from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the cord (mains lead), pull it out by the plug. Should any solid object or liquid fall into the component, unplug the tape deck and have it checked by qualified personnel before operating it any further. ⷠThe mains lead must be changed only at a qualified service shop. When you are using a TYPE II (CrO2) or TYPE IV (metal) cassette, be careful not to cover the detector slots which allow the tape player to automatically detect the type of tape. Place the tape deck in a location with adequate ventilation to prevent heat build-up in the tape deck. ⷠDo not place the unit in an inclined position. [. . . ] The remote does not work/Automatic Source Selection and/or One Touch Play does not work. The functions synchronized with the DHC-MD5 such as the CD Synchro Recording does not work. Turn on the tape deck again and press §. [. . . ]