User manual SONY TCM-16 annexe 1

[. . . ] Choose one of the following power sources. Connect the AC power adaptor to DC IN 3V and to a wall outlet. [. . . ] â· The unit will play back normally for a while even after the BATT lamp dims. However, replace the batteries as soon as you can. If you do not, subsequent recording will not be done correctly. For AC operation, use the AC power adaptor recommended for the unit (TCM-343 only). Should any problem persist after you have made these checks, consult your nearest Sony dealer. The AC power adaptor is not firmly connected (TCM-343 only). â· When trying to run on dry batteries, the AC power adaptor has been left plugged in to the DC IN 3V jack, but not to the power source (TCM-343 only). The sound drops out or comes with excessive noise. Insert a cassette with the side to start playing facing the cassette holder. press N PLAY and then adjust the volume. There is a raised dot beside VOL to show the direction to turn down volume. At the end of the tape, playback stops and the unit turns off automatically. [. . . ] Wipe the heads, pinch roller, and the capstan with a cotton swab moistened with alcohol after every 10 hours of use. ) Supplied accessories Cassette tape C-90 (1) (TCM-16 for Canada only) Alkaline batteries LR6 (2) (TCM-16 for Canada only) Design and specifications are subject to change without notice. [. . . ]