User manual SONY TDG-BR200

[. . . ] the recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. to ensure that the battery will be treated properly , hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. [. . . ] hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) Disposal of the D Glasses Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Please read these safety instructions to ensure your personal safety and prevent property damage. The 3D Glasses are operated by receiving infrared rays from the 3D Sync Transmitter. Mis-operation may occur if: The 3D Glasses do not face the 3D Sync Transmitter If there are objects blocking the path between the 3D Glasses and the 3D Sync Transmitter If there are other infrared communication devices or lighting equipment, residential heating equipment, etc. Use only the specified battery for this product: Lithium coin cell battery, CR2032. Be careful not to pinch your fingers in hinges when bending the temple frames. Do not use, store, or leave the 3D Glasses or the battery near fire, or in places with a high temperature, e. Wipe the Glasses gently with a soft cloth. Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. If using a chemically pretreated cloth, be sure to follow the instructions provided on the package. Never use strong solvents such as a thinner, alcohol or benzine for cleaning. Remove the battery's insulating sheet before using the product for the first time. Increases the width of the glasses Set both the switches on either side for a comfortable fit. Detaching or opening the cover when replacing the battery. [. . . ] Detaching or opening the cover when replacing the battery. Flashes one time every 3 seconds: Power on Flashes three times every 3 seconds: Low battery: Battery capacity is almost running out. Flashes three times: Power off Receiving signals from the 3D Sync Transmitter. This part receives IR (infrared rays) from the 3D Sync Transmitter. [. . . ]