User manual SONY TDM-BT1

[. . . ] ) connected to this unit using BLUETOOTH wireless technology, and convert digital wireless audio signals to analog (analogue) audio signals. BLUETOOTH mobile phone or other BLUETOOTH stereo audio source device * BLUETOOTH devices to be connected with this unit are required to support A2DP (Advanced Audio Distribution Profile). For details on how to operate the devices to be connected, refer to the operating instructions supplied with each device. For details regarding compatible BLUETOOTH connectable devices, visit the following URLs. [. . . ] When the LED is on: Press momentarily the OPR button to stop BLUETOOTH communication with the BLUETOOTH stereo audio device. Then press momentarily the OPR button again to turn off the signal from the unit. ­ When the LED is flashing: Press momentarily the OPR button to turn off the signal from the unit. You can reset this unit to its default setting and delete all pairing information. If this unit is turned on, use a thin pointed object (such as a paper clip) to press the RESET button to initialize this unit. The LED status indicator flashes twice, and this unit is reset to the default. If this unit is connected to a BLUETOOTH device, you cannot reset this BLUETOOTH wireless technology operates within a range of about 10 m. Maximum communication range may vary depending on obstacles (person, metal, wall, etc. The following conditions may affect the sensitivity of BLUETOOTH communication. ­ There is an obstacle such as a person, metal, or wall between this unit and BLUETOOTH device. 4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit. ­ This unit is installed horizontally on a desk made of steel. 11b/ g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. in such a case , perform the following. ­ Use this unit at least 10 m away from the wireless LAN device. ­ If this unit is used within 10 m of a wireless LAN device, turn off the wireless LAN device. ­ Install this unit and BLUETOOTH device as near to each other as possible. Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident. ­ where inflammable gas is present, in a hospital, train, airplane, or a gas (petrol) station ­ near automatic doors or a fire alarm · Refer to "To turn off the BLUETOOTH signal" (page 10) for further details regarding how to quit BLUETOOTH connection of this unit. This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology. [. . . ] * You do not need to use a cable for connection since BLUETOOTH technology is a wireless technology, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. , If you watch a TV or a DVD through BLUETOOTH connection via this unit, sound may lag behind the picture. This unit and the BLUETOOTH audio source device needs to support the following BLUETOOTH version and profile to work together: BLUETOOTH wireless technology operates within a range of about 10 m. [. . . ]