User manual SONY TMR-BT10

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] When the BLUETOOTH connection is made properly, the indicator (red) goes off and the indicator (blue) starts flashing more slowly, indicating pairing is complete and pairing information is memorized on this unit. The message standing for "Pairing complete" appears on the display of some BLUETOOTH receiving devices. ⷠWhen pairing is complete, some BLUETOOTH devices may connect with the unit automatically. To pair with other BLUETOOTH devices, repeat steps 1 to 3 for each device. Listening to music POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice, then the unit is turned on. After the unit is turned on, it connects to the BLUETOOTH receiving device automatically. notes · Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered. ⷠMake sure to turn on only the BLUETOOTH receiving device you want to connect with this unit. If many BLUETOOTH receiving devices are turned on, the connection may not be done as you desire. ⷠIf this unit cannot make the BLUETOOTH connection with a paired device, pair the device again, or try making the BLUETOOTH connection from the BLUETOOTH receiving device if possible. tips · While searching a BLUETOOTH receiving device, the indicator (blue) keeps flashing. ⷠIf two or more devices are paired with this unit, this unit tries to connect with either of the last two devices recognized before. Note When connecting to a stereo audio source device, be sure to connect this unit to the headphone jack, not to the LINE OUT jack. BLUETOOTH connection of this unit is established with A2DP (Advanced Audio Distribution Profile)* · For details on how to operate the BLUETOOTH receiving device, refer to the operating instructions supplied with the device. Even if the BLUETOOTH receiving device supports AVRCP (Audio Video Remote Control Profile), this unit cannot perform playback control functions. ⷠIn the following cases, you need to make the BLUETOOTH connection again. ­ The power of this unit does not turn on. ­ The power of the BLUETOOTH stereo audio receiving device does not turn on, or the BLUETOOTH function is off. ­ The BLUETOOTH function of this unit or the BLUETOOTH stereo audio receiving device is in sleep mode. If sound is distorted, turn down the volume of the connected device. ⷠIf volume is low or noise occurs, turn up the volume of the connected device. [. . . ] Using the BLUETOOTH device may not function on mobile phones, depending on radio wave conditions and location where the equipment is being used. ⷠIf you experience discomfort after using the BLUETOOTH device, stop using the BLUETOOTH device immediately. Should any problem persist, consult your nearest Sony dealer. ⷠDo not allow small children to use this unit. [. . . ]