User manual SONY TMR-BT8IP

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. , declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. De/ Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard in Norway. And other countries The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. [. . . ] Passcode* of this unit is fixed at "0000", "1234" or "8888. " Depending on the Bluetooth receiving device, it may be necessary to input the passcode (in this case, "0000", "1234" or "8888"). This unit cannot be paired with a Bluetooth receiving device whose passcode is not "0000", "1234" or "8888. * Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. Press and hold the power button of this unit for more than about 7 seconds to enter "Pairing in process. " After about 1 second, the indicator will flash twice but keep pressing the power button. notes When first power on this unit after initialize, this unit will enter the "Pairing in process" automatically. The pairing information is initialized if you press and hold the power button for 15 seconds. The indicator lights up for 5 seconds before the initialization starts. Release the button immediately when the indicator lights up. When the indicator of this unit flashes quickly, stop pressing it. Indicator flashes quickly: Pairing in process Indicator flashes (at about 1-second interval) when responding to the Bluetooth receiving device: Connectable (Paring successful) Indicator flashes (at about 5-second intervals): Connected Notes "Pairing in process" of this unit is released after about 5 minutes. If pairing is not established within about 5 minutes, repeat the above procedure from step . IPod backlight may turn on in this 5 minutes. To enter "Pairing in process, " you need to turn off the power of this unit first. When not completed pairing Repeat the procedure from step . To quit "Pairing in process" Press and hold the power button of this unit for about 1 second to turn off this unit. ip T When paring this unit with a number of Bluetooth receiving devices, repeat steps to for each device individually. For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as this unit. However, even if it is corresponding with the same profile, functions may differ depending on the specification of the Bluetooth device. Flashes (at about 1second intervals) Listening *1 (flashes twice at about 5-second intervals) With no music *2 (flashes once at about 5-second intervals) The indicator flashes twice on this unit. The indicator flashes once on this unit. [. . . ] ­ If this unit is used within about 10 meters (about 30 feet) of a wireless LAN device, turn off the wireless LAN device. Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident. ­ where inflammable gas is present, in ­ near automatic doors or a fire alarm. [. . . ]