User manual SONY TSL-9000L

[. . . ] The model and serial numbers are located on the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Information WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Note: The magazine should be removed before switching display to the Menu screen. When the magazine is inserted into the autoloader, the Menu screen can only be displayed when the LCD shows "Ready". To change the language setting, the magazine must be removed. 2 Press the SELECT button to move the cursor (z) among the menu items. Following descriptions of the choices for each setting screen. If no further action takes place for 10 seconds, the menu is exited and display returns to normal. When Version is selected in the Menu screen, the following screen appears, where you can confirm the autoloader model, SCSI ID, firmware version and serial number. Model Name of this Machine SCSI ID Number Firmware Version Loader Serial Number Embedded Drive Serial Number When Auto Load is selected in the Menu screen, the following screen appears. From this screen you can select whether a cartridge automatically loads into the DDS drive when a magazine is placed in the auto loader. 1 Press the SELECT button, if necessary, to move the cursor (z) to the desired setting. When ON is selected and a magazine is placed in the autoloader, the first cartridge automatically loads into the DDS drive after the cartridges have been checked. When OFF is selected, autoloading does not occur. You can press the EJECT button to cancel any change to the selection and return to the Menu screen. 2 Press the ENTER button to accept the selection and return to the Menu When Unload is selected in in the Menu screen, the following screen appears. From this screen you can select what happens when the last cartridge finishes processing: that is, whether it is simply unloaded from the DDS drive, or if the first cartridge is subsequently reloaded and processing continued automatically (in a continuous loop). 1 Press the SELECT button, if necessary, to move the cursor (z) to the desired setting. When OFF is selected, the first cartridge does not automatically reload into the DDS drive after the last cartridge finishes. When ON is selected, the first cartridge automatically reloads. You can press the EJECT button to cancel any change to the selection and return to the Menu screen. 2 Press the ENTER button to accept the selection and return to the Menu When Contrast is selected in the Menu screen, the following screen appears. [. . . ] This makes cartridges move from the top shelf to the bottom shelf. Moving top shelf cartridges to the bottom shelf 5 Repeat steps 1 and 2 to remove the cartridges from the bottom shelf. 1 Ensure that the BUSY and TAPE indicators are off, then insert the When the magazine is loaded, the following actions occur: · As each cartridge is checked, its number blinks. Note When Autoload is set to ON by the Menu screen and a magazine is inserted, the first cartridge is loaded into the DDS drive automatically after the cartridges within the magazine have been checked. [. . . ]