User manual SONY TSL-A300C

[. . . ] The model and serial numbers are located on the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Information WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] 2 Press the ENTER button to accept the selection and return to the Menu When Unload is selected in the Menu screen, the following screen appears. From this screen you can select what happens when the Unload (LUN0) command is selected while the fourth cartridge is loaded into the AIT drive. OFF: The cartridge is returned to the magazine and the first cartridge does not automatically reload. ) Please use this as the usual mode of operation. ON: The cartridge is returned to the magazine and the first cartridge is automatically reloaded into the drive. 1 Press the SELECT button, if necessary, to move the cursor (z) to the desired setting. You can press the EJECT button to cancel any change to the selection and return to the Menu screen. 2 Press the ENTER button to accept the selection and return to the Menu When Contrast is selected in the Menu screen, the following screen appears. You can adjust the display contrast from this screen. When Orientation is selected in the Menu screen, the following screen appears, where you can select the orientation of the display to match your viewing angle. Z Horizontal R-side down L-side down 1 Press the SELECT button, as necessary, to move the cursor (z) to the You can press the EJECT button to cancel any change to the selection and return to the Menu screen. Note: When making settings with the Menu screen, the display is always oriented so that the top of the display corresponds with the top of the unit. Note: To change the language setting, remove the magazine from the unit. The language setting cannot be changed while the magazine is inserted. When Language is selected in the Menu screen, the following screen appears, where you can select the language of the displayed messages. 1 Press the SELECT button, as necessary, to move the cursor (z) to the desired setting. You can press the EJECT button to cancel any change to the selection and return to the Menu screen. 2 Press the ENTER button to accept the selection and return to the Menu screen. Note: The Menu screen itself is always displayed in English. Always load four cartridges into the magazine. Make sure that cartridges are correctly oriented. Damage may result if fewer than four cartridges are loaded or if the cartridges are loaded incorrectly. [. . . ] â· Magazines and cartridges are carefully adjusted during assembly at the factory. Please do not try to open them or take them apart. â· The write-protect tabs on magazines and cartridges prevent the tape from being written to or accidentally erased. If you do not need to write to the tape, move the magazine or cartridge write-protect tab to the write-protect position. [. . . ]