User manual SONY USM64U2

[. . . ] â· Our product warranty is limited only to the USB storage media itself, when used normally in accordance with these operating instructions and with the accessories (including the software) that were included with this unit in the specified or recommended system environment. Services provided by the Company, such as user support, are also subject to these restrictions. â· The Company cannot accept liability for damage or loss resulting from the use of this unit, or for any claim from a third party. â· The Company cannot accept any liability for: problems with your computer or other hardware arising from the use of this product; the suitability of this product for specific hardware, software, or peripherals; operating conflicts with other installed software; data loss; or other accidental or unavoidable damages. [. . . ] This Class B digital apparatus complies with Canadian ICES-003. This product conforms to the following European Directives, 89/336/ECC, 92/31/EEC (EMC Directive) 93/68/EEC (CE Marking Directive) This product complies with EN55022 Class B and EN55024 for use in the following areas; residential, commercial, and light-industrial. The device driver must be installed by following the procedure described below. 1 Insert the CD-ROM included with the Micro Vault into the computer's CD-ROM drive. When using a CD-ROM drive connected to a USB port, copy the installation program from the CD-ROM to the C drive of your computer or any other location. If your computer does not have a CD-ROM drive, download the device driver from the Micro Vault Web site at: http://www. 4 Click "Search for the best driver for your device", and then click the Next button. 5 Click "CD-ROM drive" and then click the Next button. If you copied the installation program from the CD-ROM to the desktop or if you downloaded the device driver from the Micro Vault Web site, click "Specify a location" and then click the Browse button. When the dialog box appears, specify the folder where the installation program is stored, click the OK button to close the dialog box, and then click the Next button. 8 Repeat steps 3 through 7 to complete the installation. Once the installation process is complete, a drive icon for the Micro Vault appears in the [My Computer] window. 0 cards or boards, you may need to initiate installation manually. Follow the instructions displayed on the screen to search for a suitable driver. Please remove the Micro Vault properly following the procedure described in this manual. Otherwise, data may not be recorded correctly. â· If the USB port connector is not easily accessible, you can use a USB hub to attach the Micro Vault to the USB port connector on your computer. ) You can now copy and save data on the Micro Vault by dragging files and folders on the drive icon, just as you would when copying data to a hard disk or to a floppy disk. [. . . ] Make sure you set a hint that will help you remember your password. If you do forget your password, click [Forgot Password? ] in the Setup Menu screen , and perform one of the following procedures in the screen that appears. Note that performing either of the following procedures will delete all of the files stored on the security drive. [. . . ]