User manual SONY VAIO PCG-F807K

[. . . ] This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the software or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information contained herein or to use thereof. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. [. . . ] lift the computer away from the port replicator. Close the port replicator connector cover on the bottom of your computer. It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open, dirt may get inside and damage the computer. You can connect a Windows-compatible printer to your computer to print documents. You can connect a USB printer compatible with your version of Windows® to your computer. Use the symbol to locate the USB port on your computer and printer. Plug the printer cable (supplied with the printer) into this port on the computer. See the manual supplied with your printer for more information on installation and use. Before using the printer, you may need to change the Printer setting in the Sony Notebook Setup software. Sony Notebook Computer User Guide See the manual supplied with your peripheral for more information on installation and use. You can connect an external display to your notebook computer. For example, you can use the computer with any of the following: Computer display (monitor), Multimedia computer display, Projector. Connected external displays are used as second screens. On Windows® systems only, you can also use an external display to set up a virtual desktop (Please refer to Using the Dual Display Function in your Software Guide for further details). If necessary, plug one end of the display power-cord into the display, and the other end into an AC outlet. Sony Notebook Computer User Guide See the manual supplied with your projector for more information on installation and use. You may not be able to display the computer's LCD and the external display together, depending on the types of computer display and projector used. You can use a projector such as the Sony LCD Projector as an external display. When you connect an external display to the monitor connector, you can toggle the output between the notebook LCD-screen, the external monitor, or both devices. Please refer to Selecting the Display Mode in your Software guide for more information. To Switch to an external display Press Fn+F 7 Result Toggles between the LCD, the external display connected to the Monitor connector, and both the LCD and external display. [. . . ] If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching the end of its life and should be replaced. You do not need to discharge the battery before recharging. If you have not used the battery pack for a considerable amount of time, recharge the battery. Road safety ­ Do not use earphones while driving, cycling, or operating any motorized vehicle. [. . . ]