User manual SONY VAIO PCG-GRV616G

[. . . ] N Sony notebook user guide PCG-GRV series Read this first Sony Notebook User Guide nN 1 Read this first Notice © 2003 Sony Corporation. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machinereadable form without prior written approval. Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the software or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information contained herein or the use thereof. [. . . ] If the display resolution of your computer is more than 1280 x 1024 pixels, a part of the image cannot be displayed on your TV. The hidden area on your TV can be seen by moving the cursor on your computer. If you want to display the full image, change the display resolution of your computer to 1024 x 768 pixels. Connecting peripheral devices Sony Notebook User Guide nN 63 Connecting a projector You can connect a projector (such as the Sony LCD projector) directly to your notebook. To connect a projector, proceed as follows: 1 2 Plug the RGB signal cable (1) into the monitor/ VGA connector (2) identified by the symbol. Plug the audio cable (3) (not supplied) into the earphone connector (4) identified by the symbol. Plug the RGB signal cable and the audio cable into the connectors of the projector (5). Connect the power cord (6) of the projector into an AC outlet. You may not be able to display the computer's LCD and the external display together, depending on the types of computer display and projector used. You can toggle the output between the notebook LCD-screen and the external monitor by pressing the key combination <Fn>+<F7>. 3 4 Connecting peripheral devices Sony Notebook User Guide nN 64 Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, proceed as follows: 1 2 3 Plug the speaker cable (1) into the headphone connector (2). Plug the other end of the speaker cable into the external speaker. Turn down the volume of the speakers before you turn them on. Make sure your speakers are designed for computer use. Do not place diskettes on the speakers; their magnetic field may damage the data on the diskettes. Connecting peripheral devices Sony Notebook User Guide nN 65 Connecting an external microphone Your VAIO notebook does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, proceed as follows: 1 Plug the microphone cable (1) into the microphone connector (2) identified by the symbol. Make sure your microphone is designed for computer use. Connecting peripheral devices Sony Notebook User Guide nN 66 Connecting a Universal Serial Bus (USB) device You can connect a USB device (for example, a mouse, floppy disk drive, keyboard, printer) to your computer. Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer. You may need to install software (device drivers) supplied with your USB device before using the USB device. There are 3 USB ports on your notebook (at the back, at the left, at the right). Connecting a USB mouse To connect a USB mouse, proceed as follows: 1 2 Choose the USB connector you prefer to use (at the back, left or right of the notebook (1). Plug the USB mouse cable (2) into the USB connector. You can use your USB mouse (3). The VAIO USB mouse software driver is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB connector and you can start working. Connecting peripheral devices Sony Notebook User Guide nN 67 Connecting a USB floppy disk drive As an optional extra, you can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive, proceed as follows: 1 2 Choose the USB connector you prefer to use. Plug the USB floppy disk drive cable (1) into the USB connector (2). The VAIO logo on the disk drive should be facing up. [. . . ] The higher the RAM capacity, the faster your current data can be processed. The degree of sharpness and clarity of an image. Frequent computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch screen), 800 x 600 (appropriate for a 15-inch screen), 1, 024 by 768 (appropriate for a 17-inch screen), and 1, 280 by 1, 024. LCD displays usually use a higher resolution than a CRT of the same size. [. . . ]