User manual SONY VAIO VPCZ12F7E

[. . . ] N User Guide Personal Computer VPCZ12 Series n2N Contents Before Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Finding More about Your VAIO Computer . . . . . . . . . . . . . . . . . . . . 5 Ergonomic Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you forget the machine password, the password needs to be reset and a fee will be charged. To reset the password, contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 5). You can reset the user password at the BIOS setup screen by entering the machine password. ! Windows password Allows users to log onto your computer and protect each user account with its own password. Entry of the Windows password will be prompted after you select your user account. If your computer is equipped with a fingerprint sensor and you have set the password in conjunction with the fingerprint authentication function, you can substitute fingerprint authentication for password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 79). Customizing Your VAIO Computer > Setting the Password n 133 N Setting the Power-on Password To add the power-on password (machine password) 1 2 Turn on the computer. Press the F2 key when the VAIO logo appears. If the screen does not appear, restart the computer and press the F2 key several times when the VAIO logo appears. Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key. On the password entry screen, enter the password twice and press the Enter key. The password can be up to 32 alphanumeric characters long (including spaces). Select Password when Power On under Security and press the Enter key. Change the setting from Disabled to Enabled. Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. 3 4 5 6 7 Customizing Your VAIO Computer > Setting the Password n 134 N To add the power-on password (user password) !Make sure you set the machine password before setting the user password. 1 2 Turn on the computer. Press the F2 key when the VAIO logo appears. If the screen does not appear, restart the computer and press the F2 key several times when the VAIO logo appears. Enter the machine password and press the Enter key. Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key. On the password entry screen, enter the password twice and press the Enter key. The password can be up to 32 alphanumeric characters long (including spaces). [. . . ] ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. Trademarks > n 216 N SD Logo is a trademark. The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. [. . . ]