User manual SONY VCA-42

[. . . ] If you have any questions or for the latest support information, visit the website below. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. [. . . ] When installing the unit, use only the hardware provided and avoid mounting to any critical components of the vehicle. Take care to prevent cords or wires from getting tangled or crimped in the moving portion of a seat rail. Please consult a qualified technician or service personnel if you cannot install this unit in the car securely. Before attaching Choose a location where no obstacle blocks GPS satellite reception so as to achieve best reception. Make sure the unit does not interfere with the operation of car equipment. Attaching to the roof of a car using magnet Position the unit horizontally, and where GPS satellite reception is not blocked by the roof or boot. Note Place the unit carefully so as not to damage the car's body surface. Roof A Pass the cord along the windshield (windscreen) pillar, fender and molding, then pull it into the car. Roof B Pass the cord along the center pillar, windshield (windscreen) pillar inner side and dashboard, then pull it into the car. Note If the car uses a curtain-type side airbag that spreads from the windshield (windscreen) pillar over the center pillar, or a shockabsorbing structure for its interior, be sure to place the cord at a distance from it. Note when installing the cord Secure the cord using a commercially available cord clamps in the form of a U-shape if necessary, to prevent rain water from entering the car along the cord, or the cord from disturbing driving. Notes Do not allow cord slack outside of the car. [. . . ] Halogenated flame retardants are not used in cabinets and in printed wiring boards. VOC (Volatile Organic Compound)-free vegetable oil based ink is used for printing the carton. [. . . ]