User manual SONY VCL-HG1737C

[. . . ] Doing so might harm your eyes or cause loss of eyesight. ) Be careful not to injure yourself by dropping the lens. [. . . ] First remove the lens hood with the lens cap, the MC protector or the filter, and then attach the conversion lens to the camera. Use of a filter when the conversion lens is attached is not recommended. remove the conversion lens when transporting. Be careful not to subject the lens to mechanical shock while attaching it. Always place the lens caps on the lens when storing. Do not keep the lens in a very humid place for a long period of time to prevent mold. Be careful when placing the camera on a table or other flat surface with the conversion lens mounted. ⷠWhen using the wide conversion lens at a telephoto position, the image may be out of focus. If this occurs, adjust the zoom towards the wide-angle position until the image is in focus. when using the VCL-HG1737C tele conversion lens · Use the supplied accessory *flare-prevention hood when sunlight reflections might occur while shooting outdoors. When using the tele conversion lens at a wide-angle position, the peripheral area of the screen darken. Depending on your camera: ­ The built-in flash cannot be used. If your lens is brought directly from a cold place to a warm place, condensation may appear on the lens. To avoid this, place the lens in a plastic bag or something similar. [. . . ] To avoid this, place the lens in a plastic bag or something similar. When the air temperature inside the bag reaches the surrounding temperature, take the lens out. [. . . ]